What about reading it from the performance file ? Like this : First Driver=1,Michael Schumacher,16384,512,16384,512,MSCby Gusgus - Grand Prix 4
I'm sorry, I'm gonna be harsh, but I hope you will take my post for what it is intended to be : constructive criticism. Judging from the ZModeler shot taken from the side, there is a major problem at the back of the car : the rear wheel axle is at least 200mm too much far back, it should be aligned exactly with the frontmost part of the rear wing (the official 2013 Formula 1 Technicaby Gusgus - Grand Prix 4
You have to install the official patch before replacing the GP4.exe with the decrypted oneby Gusgus - Grand Prix 4
@Flynn : sorry for the late answer, I've been very busy during the last few months. There is still a lot of work to do with the templates, the shape of the second car and the lower LODs. I won't give any deadline because afterwards, there's a lot of pressure to stick to it and I don't want that, but I still plan to release this sooner or later To try and be forgiven for thby Gusgus - Grand Prix 4
Ah, Jorge Caranti... There has been fights between us. A majority of them must have been useless and annoying to follow. I very much regret this petty fighting, and if he reads this post, may he be assured that I think it's a shame he leaves, that I sincerely have no hard feelings towards him and that I wish him the very best for his lifeby Gusgus - Grand Prix 4
Thanks everyone for the first comments, it's motivating @SkaaningeN : you will be punished for not reading the first post The templates are nearly completedby Gusgus - Grand Prix 4
It's time for me to open my workthread Although I'm not planning a lot of releases, in the following weeks, I'm going to release a fictional 2011 car, named GM GP11 (GM standing for Gusgus Motorsports). This car has been shaped with particular focus on realistic proportions after deep reading of the F1 regulations, attention to details, and general quality, trying no to reproduceby Gusgus - Grand Prix 4
This has nothing to do with the tyres. In cockpit wiew, the suspension objects of the car are used with the cockpit object. Since 2010, the front of the cars is higher, so is the suspension. That means the old cockpit shape this mod is using is not suited to new cars. You have to use a different cockpit shape or to raise it using GP4Builder.by Gusgus - Grand Prix 4
Hi there, I'm not sure if it's the right thread to do so, but I'm looking for a picture of sponsorless white driver overalls from the neck to the ankle, to use for a template creation. Has anybody got that ? Thanks in advanceby Gusgus - Grand Prix 4
Here is a 20% race in Road America at Elkhart Lake made for a competition on another forum :by Gusgus - Grand Prix 4
Webber's speeding was at 13:31, which means it was when leaving the pits to go the the grid, therefore, it didn't really happen during the race but before.by Gusgus - F1
Great car In French, it should be "mais c'est aussi une légende"by Gusgus - Grand Prix 4
MDBSnake Wrote: ------------------------------------------------------- > Deleting parts won't affect the template, the part > of the template just becomes unusable as it's not > their anymore - adding objects however will need a > remap. You might have to delete some shadows to remain consistent thoughby Gusgus - Grand Prix 4
Credits should be made at first place to Teraur whose MP4/20 has been used by Alexschumi, Excalibur and myself as a first base to this release. Before leaving, he said it was no problem to use his work by all means as long as he was credited, so please keep that in mindby Gusgus - Grand Prix 4
Modders post a topic before release so that they have feedback on their work, not to have stupid impatient users post crap like "Release please" or "When do you release ?". Modders don't have this kind of feedback if they only post for the release and leave it as it is.by Gusgus - Grand Prix 4
Why not using actual French Peugeot drivers names like Nicolas Minassian and Stéphane Sarrazin ?by Gusgus - Grand Prix 4
Excellent work Mitsuro Sano AlexSchumi Wrote: ------------------------------------------------------- > what a surprise I didn't see that coming eitherby Gusgus - Grand Prix 4
watercolours Wrote: ------------------------------------------------------- > Apart from the slow pace of McLarens, I have > stated that rearmost part of MP4-24's engine cover > is semi-transparent. It's clear in the picture > below. The outer lines of right fin of rear wing > is clearly visible through engine cover. I don't > know how they manage to prevenby Gusgus - F1
Be careful with this picture though, the height of front wing is measured from the skid block of the car, not from the ground.by Gusgus - Grand Prix 4
The tutoriel was at The Grand Prix 4 World site, which is currently closed.by Gusgus - Grand Prix 4
Here is my first render, done thanks to the tutorial from raulongo (translated in French by lefou63) : Tell me what you think about it (apart from the disgusting bug in the front wing :P)by Gusgus - Grand Prix 4
Hi Alesi no1, It's a long time since I last thougth of this project. So, it's not really something I will be able to carry considering my lack of time at the moment. I have a lot of unfinished GP4 projects, because I never find the time or the capacities to finish them. Unfortunately, this one is no exception compared to the others, even I never began work on this, only Jorge had begby Gusgus - Grand Prix 4
It's probably a track-related problem, with the physic part of the road not corresponding to the graphic part.by Gusgus - Grand Prix 4
The pipes are the ones coupled to the car when it stops, to cool the brakes down And the McLaren wheel cover has already been seen earlier in the year, I read it's just a device used in testing sessions to calculate the rotation speed of the wheel.by Gusgus - F1
I don't know if you noticed, filou16, but the Agip logo in the back of the rear wing is flippedby Gusgus - Grand Prix 4
And if you can understand the Technical regulations at , the bodywork rules can help you have realistic proportions in your shapingby Gusgus - Grand Prix 4
@BAR#10 : Read my previous post edited, you have 855 BHP with original physics (and CTPD unchecked), 75 more than the best engine on the gridby Gusgus - Grand Prix 4
Which top speed does CC cars reach ? Is you mod a CSM Mod ? If so, is you GP4.exe V8-torque patched (ie. does the Data\Patch\ folder of the mod have a file named "V8.cap" in it ? EDIT - If you run original physics, all is normal, because the original BHP is 855 at 16600 RPM.by Gusgus - Grand Prix 4
You don't have 2001 BHP, you have the BHP included in the physic file, which is commonly the best BHP of the perf file.by Gusgus - Grand Prix 4