GP4 Track Editing - new new thread

looks like the pitboxes are placed very close to each other & maybe the textures are struggling as to which is displayed...do the textures flicker as the car approaches....

Be sure to open the .gp4 file of the track in GP4 Builder and in Action menu, click on fix parts to object links (You might see that some links were broken).
Save the .gp4 and reinsert it in the wad. It might be better.





Edited 2 time(s). Last edit at 11/29/2011 09:25PM by Lo2k.

Lo2k, Fixed problem... Grateful

Lo2k Wrote:
-------------------------------------------------------
> Be sure to open the .gp4 file of the track in GP4
> Builder and in Action menu, click on fix parts to
> pbject links (You might see that some links were
> broken).
> Save the .gp4 and reinsert it in the wad. It might
> be better.

AYRTON SENNA FOREVER!

glad it worked as I supposed

Hi there


Laurent, is it possible to delete rail fences at .col file?

hi laurent, a little idea preventing me to say bad words as yesterday :P Can you insert a small window wich advise user that CLOSING GP4BUILDER WITHOUT SAVING COULD HAVE BAD CONSEGUENCES??? :D, yes yesterday i lost 2h of work because a damned click in X icon :D

An "exit without saving?" message would be nice indeed.



[1991] [2003] [2004] [gp2 world series]

@Gildoorf: Nope, you can't right now. so it leaves two solutions : edit .dat and recreate the .col or displace .col fence out of the track, vertex by vertex...There's nothing better yet.

@32BOBO32 and Erix, there's definitely one warning message, some people here have already often complain about it. What kind of files were you working with to get no messages ?
(By the way, closing delphi and quickly hitting "no" (change saving) lead me to say the same bad words yesterday so even warning messages could be useless )





Edited 1 time(s). Last edit at 02/27/2007 12:55AM by Lo2k.

:D i was working on a track (gp4+dat)

@32BOBO32: weird. Did you rather work on .dat or .gp4 then ?

it works fine now :|

Does anyone know how to rotate the cars in the pit garages? I've got Indy in place of Monaco, slot 7, and my cars are sitting at 45°. Any chance someone knows how to make the cars sit normally. I've copied the Indy specs in Anim.wad to Monaco, but no difference.

Try desc93 in the magic data

____
Tony

Was that directed at me B-Tone?

How do you edit the Magic Data if it was?

Use cmagic to edit magic data. You can find it at gpxpatch's site.



[1991] [2003] [2004] [gp2 world series]

i had this problem in sufers....on original dat file i used monaco..
it had cars pointing in a direction also..i had the solution to import the magic dat from another track & all was ok.

Viper-F1.com Wrote:
-------------------------------------------------------
> Was that directed at me B-Tone?
>
> How do you edit the Magic Data if it was?


Get hold of CMagic to extract and insert magic data into track dats. The MD can be edited in notepad. Compare Monaco's desc93 (angled) with other tracks (straight).

____
Tony

i had this problem in bahrain and in shangai track. I tried with magic but it didn't work. lo2k suggest me to set some values to initial sector if i remember right... but i forgot it But now works correctly

Woohoo! Got it fixed. Cheers guys!! My 2007 hard-wired track wads can now continue its progress in prep for the 18th!

Can a track be fully working with a sector being about half shorter than 16 ft ? I say this because of Indy, which I have to make perfectly symetrical, and this way I should make a sector shorter than others to make the symetric of the overlapping sector. So i ask not to spend time for nothing. Thanks

---

My workthread here