R_Scandura Wrote:
-------------------------------------------------------
> tried all, still some annoyance indeed. what i
> noticed most is a slipstream multiplier. In
> example with 3 cars or more behind eachother there
> is a sort of vacuum effect at the braking which is
> too much exagerated.
not really noticed anything
> another annoying problem is AI car ignoring my
> position or even my existance in the track. in
> example at the chicane in hungaroring i must let
> every ai car pass if they attack otherwise we
> collide. they don't 'see' that i'm placed in front
> of them to block, just go.
they are aggresive, you're probably not getting on the throttle
earlier enough in the previous turn
it's one of my favourite
overtaking places at hungaroring
> there is something that makes the car react later
> to the presence of a car in front otherwise would
> be a big AI lack. fuel weight + vacuum effect +
> car blocking and the AI car still go like on open
> space :S
>
this is probably because you've stearing help on, it's the games
attempt at steering you away from trouble, it's not noticable when
you have steering help 90% or lower.
> i remember you once posted something about these
> commands which i took for good. seen a certain
> effect but unable to quantify it
>
> 128 ; subtracted from diff between field_e2
> of 2 cars and then compared to speed of first car
it is related to slipstream but has no noticable effect, I've
got this listed as ai aggresiveness
64768 ; added to car.field_108. related to cc grip factormain ai grip, orig values used are 64768, 64896, 65024, and 0 (65536)
256 ; grip???main ai grip, maybe fine tuning, orig values used are 256, 384, 512, 640, 768
also what about the air resistance?used with desc45/46, see below
desc45=related to next value belowalso ride height, use in conjunction with desc 46, to alternride height
low=low ride height
orig values used low=12 spa, hi=33 sepang
desc46=ride heightlow=higher ride height
low=930 nurburgring, hi=1010 melbourne/suzuka
desc47=air resistance?not sure if that is the right description, but it needed to be named something
orig values used low=15465 interlagos, hi=16892 monaco
basically if you lower desc45 then you lower desc46/47,
desc47 air resistance is altered to adjust engine power output, it's important
to check fuel consumption after altering this value.