Also, for gp3 you need to change the propertiesof the jams using a jam editor.
The transparent colour in gp3 is Red:0 Green:252 Blue:248
you must set up the jam before the transparency will work.
using a jameditor open each jam. eg.Ferrar98
Then right click on each jam texture
(in the case of Ferrar98: Texture ID:292,Texture ID:293,Texture ID:294)
When you right click on the texture,select the "Texture properties" option.
window will pop up with check boxes. tick the "Transparent" check box.
after ticking the "transparent" option on all the textures, save the jam.
If a jam has the transparent option ticked, the colour Red:0 Green:252 Blue:248, also known as cyan, will appear transparent.
*NOTE?: This does not always work because some graphics cards dont support transparency*
Good Luck
Edited 1 time(s). Last edit at 06/19/2004 06:23PM by Traction.