2012 Tracks

@holemad, if you send it to me I won't need the jam files. Email is mullet111@hotmail.com

---

holemad Wrote:
-------------------------------------------------------
> @Rob: i checked the split times and the original
> belini track has the same values.
> split1 = 1088 and split2 = 4116 (???)
> I changed them like you described without any
> differences.
> Then i changed it into 425(combes) and
> 1088(stavelot) and it worked fine but i dont know
> if there's a difference between 1.13 and 2K.

yes Dirk, basically you have to recalculate the position fron the s/f.
as to why in those track are done that way i don't know. i'm not much into gp3 2000. what i noticed at least on gp3 1.13 is that when i fix split1 and split2 and then i divide the sectors between into many smaller sectors, the position of split2 jumps to another place before or after bypassing my entry. so i thought split2 was done making an entire round of the track to fall again in that place.
for the exact info, i'm not the one to ask i'm afraid

-------------------------------




Edited 2 time(s). Last edit at 11/13/2012 04:25PM by R_Scandura.

well, gp3 still has some secrets .... the most important is that we found a solution.

Well, I'll put here Saudi Arabian track. If someone wants to continue... =D

Link:
[www.4shared.com]

I put lots of JAMs on folder.

Another thing: I use Belini pitboxes and teamboxes. He authorizes!!

So, I made track layout, escape areas, adjust camera, grid lines... I stopped to make scenery and horizon.

If someone makes objects, distance signs, marshalls, stands and some buildings and CC-line, I can put textures on track, walls and tarmacs.


One Racing driver and team manager
GPGSL-3: champion in 2007/2013/2014!
GPGSL-4: testdrivers champion in Season 11!

Some fictional tracks:

USA:


Sweden:


Street track:


Moldavia:


Real track: Lausitzring (if someone wants to make):



One Racing driver and team manager
GPGSL-3: champion in 2007/2013/2014!
GPGSL-4: testdrivers champion in Season 11!

You should open a new thread for that Rod, so we can all go to it easily rather than in a 2012 Tracks thread.

---

EricMoinet Wrote:
-------------------------------------------------------
> You should open a new thread for that Rod, so we
> can all go to it easily rather than in a 2012
> Tracks thread.

+1.

---

yes indeed, the thread was supposed to be for the 2012 tracks that i've done, but it seems to evolve to a request page.
that is not a problem for me personally but it can confuse some people.
maybe you could start a wishlist or tracks in progress thread ...

@mullet345: did you get the updated spa ?

@holemad, Yes, but haven't check it out yet.

---

holemad écrivait:
-------------------------------------------------------
> yes indeed, the thread was supposed to be for the
> 2012 tracks that i've done, but it seems to evolve
> to a request page.
> that is not a problem for me personally but it can
> confuse some people.
> maybe you could start a wishlist or tracks in
> progress thread ...
>
In orher words that was my meaning

---

Sorry, guys!


One Racing driver and team manager
GPGSL-3: champion in 2007/2013/2014!
GPGSL-4: testdrivers champion in Season 11!

Another problem found with Belgium 2012. Going into Bus Stop I take the normal line and it sometimes puts me into the fence. Would it be object clipping? Or is there something else causing the problem? I don't want that happening during a race as it may cause me to hit another car.

---

Yes, i believe that is when you take the chicane to narrow.
I dont know if it has to do with bridged fences or what, its a bizar construction; i dont have a solution.
Maybe the original belini has it too?

it's a matter of bridged fences. in the area the sectors have the bridged option checked but not the wall removed so you hit on the walls which are above the kerbs.
do like this:
from sector 1360 to 1365 uncheck the right revove and the brighing and set the right banks to 96
from sector 1366 to 1377 check both options RIGHT WALLS and BRIDGES
save and apply the md

-------------------------------




Edited 3 time(s). Last edit at 11/15/2012 11:56AM by R_Scandura.

Thanks Rob, I already thought in this direction but wasn't sure and didn't want to mess up things.
I'll try this when i get home.

MD ?? Don't know if I have it somewhere.

Dirk

you should put a magicdata or the track will run with no settings

-------------------------------

Mr. Holemad, yes we have MD to your tracks...you are doing updates for belini tracks..especially for 2010 versions..so we can use MD from original belini 2010 tracks..they are for gp32k so we need convert them from MD2 to MD...that´s no problem and your updated tracks work fine with this MD...without MD you can get right laps time, setups, fuel consumption.....and in my GP11 I am using your great work..of course the huge credits go to Mr. Belini...

Thanks Marco, I've looked in my archives and dont have the MD. I checked the originals but even there nothing in the dat-file.
If you have them, ok.
And if you want to send them to me, i'll put them in the upload.

First i gonna test rob's idea for spa.

The fences at bus stop are done, without touching the bridging/remove commands, only the track to bank right distance has changed.
Also did a little update on the tents (some jams misplaced).
I've sent it to mullet345 to have another testdrive ....

Looks like the problem with Belgium 2012 Bus Stop is now fixed. Didn't get pushed into the fence once. And what is the current status of the new Austin circuit? Is there anyone working on it?

---