Search for "TwinViewDisabled" here on the forum. It's got something to do with the NVidia drivers.by FloP - Grand Prix 3
For me, running GPxPatch in debug mode made everything a lot worse.by FloP - Grand Prix 4
So if you go to the System Control menu (or however it's called), choose Game Controllers, pick the wheel and click properties, can you check a box saying "operate pedals seperately"?by FloP - Grand Prix 4
Maybe the OS is your problem? I'm on Win98 SE. Or another possibility, I don't run the drivers from the CD anymore but some from the TM homepage (V2.3.6). Maybe they've added the split axis option.by FloP - Grand Prix 4
Doesn't a custom controller configuration solve the problem?? I've got my TM FF GT wheel working with split axis (z=throttle, y=brake) with V 1.02 of GP4.by FloP - Grand Prix 4
For me it works without any problems! I set the option to "operate pedals seperately" in the Thrustmaster software and recalibrated the wheel. After this I set z-axis for throttle and y-axis for brake in GP3. In GP4 I started up with this setting and didn't have any problems calibrating it like that. FloP EDIT: For doing this I had to create my own custom comtroller setting.by FloP - Grand Prix 3
NVIDIA drivers think you have 2 screens installed. Do some forum search for further info on this.by FloP - Grand Prix 3
As arttool is only for GP3-2000, you have to use another editor for the original 1998 version. I think i used GP3Master for this, but don't do it more than once every half a year or so, it's lots of work to get it to work. FloPby FloP - Grand Prix 3
When I tried to use German names for the countries using the track editor after a few uses of the track a message appeared saying the track couldn't be loaded, file damaged. For the records I used GP3Master if I remember correctly. This worked well. I also changed the shown track layout using this utility to get it even a bit better, but I don't want to do this more than once... FloPby FloP - Grand Prix 3
I don't know of any layout changes since the chicane has been added between 1992 and 1993. FloPby FloP - Grand Prix 3
If there are more than just one "moving wheel" bitmap, why not only change the ones used for slowly-moving wheels? They also glow some time when braking is over, so this should be ok.by FloP - Grand Prix 3
To those with the recalibrate graphics problem: I had this, too, and I found a solution in another thread here. There are two screens installed on the system, one correctly and a default one. You have to recalibrate something in the registry with the NVidia drivers, but I don't remember everything. The most important thing is that they want to run in two-screen-mode which has to be disabledby FloP - Grand Prix 3
Hi! Perhaps these people can help you, as they're doing the 1969 Montjuich track for gpl. Look at FloPby FloP - Grand Prix 3
Well, that's sad news. I just tried it out but almost didn't recognize anything. The gpl Version is very good though.by FloP - Grand Prix 3
Can anybody convert the Nürburgring Nordschleife from gpl to GP3? I'd like to drive there in a modern gp car a lot. Would this be too much work or is anybody else interested? FloPby FloP - Grand Prix 3
OK I know what you mean, but even the numbers I put in the upper third weren't displayed on any side of the rear wing, nor were the ones placed in the lower third. The numbers placed in the middle third of the .bmp were used on the front wing, but not on the car's nose. In GP3Edit I chose them and also where to put them on the car, so that wasn't the problem, but they weren'tby FloP - Grand Prix 3
I tried out putting numbers in other directions anywhere into the .bmp, but GP3 didn't use them even if I patched everything before. Those numbers included in the .bmp originally are usually usable with GP3Edit. Do they have to be in any special positions to make GP3 able to use them? FloPby FloP - Grand Prix 3
Exactly, that was it. I probably hadn't played around long enough with the program to find it out.by FloP - Grand Prix 3
I see, these are only to use with GP3-2000. But what are the car number positions from GP3edit? Is there anything to do with these to get two different numbers on the cars of one team? Thanks, FloPby FloP - Grand Prix 3
Why are there always two pictures-one for each car number- included in the carskins zip-files? (how) can you use them with GP3 V1.13? The original cars all had different numbers on them.... FloPby FloP - Grand Prix 3