I don't know if it's the same. Take a look please. Made by Roberto Scandura - v2.0 ( 26-11-2012 ) Link:by evroic - Grand Prix 3
Hi Henrik, I found the first and second. Could you tell me where I could download the third one? Link: Dakar Desert Stage 1_2020.dat => Dan-Eilat / Negev-Galilee v1.1 Dakar Desert Stage 2_2020.dat => Hellesylt v1.0 Dakar Desert Stage 3_2021.dat => NOT FOUND !!! Very good job. Thanks for another gift for GP3 loversby evroic - Grand Prix 3
Hi Helmut Here is the post => Nine new tracks for GP2 Antonio Pessoa 26.02.2020, 01:24 DAKAR BAOBABS, Senegal Dakar Baobabs_Senegal_2008.zipby evroic - Grand Prix 3
Hi, I would like to know if anyone has an image similar to that of any other racing game (preferably without the gear lever, but it doesn't matter if it has). I will try to remove it ... as I did. This one I got on the GP3 forum and it's the one I'm using to play GP3. I would like another one to do the same. As I don't know other games I would be grateful iby evroic - Other Games
Elio and Shlund Take a look at your mailbox. I sent you a message with a WIP project. Regardsby evroic - Grand Prix 3
Hi Andrzej Here are some sites that I have already visited. 1. 2. 3. 3. 4. Here are some sites that I believe are online but the files are no longer available. You need to check. 1. 2. 3. 4. If anyone knows of any other, please post it to us.by evroic - Grand Prix 3
Hi Here is "Imola 2004 made by Fernando Laguardia" and "Imola 2007 made by Roberto Scandura" The name "Fix by me" refers to the fact that I have organized all the necessary JAM and JIP files in the respective folders according to the "Jam Files" structure contained in the DAT file. So just unzip and enjoy. In the case of 2007 I extracted the Mby evroic - Grand Prix 3
Hi Degas Another case discovered by Sherlock Holmes Very important tip !!! I was only successful in editing GP3INFO information through GP3TrackEditor using the Windows XP operating system. This test was done in GP3 1.13 When using Win7 64 bits I was even able to change and save the information in the DAT file but for some reason it was not shown in the game. It is imporby evroic - Grand Prix 3
Hi Elio The complete package is at this link:by evroic - Grand Prix 3
Hello everyone. I found the Belini structure installed on the "MegaPatch F1 2018" made by Elio => The same problem occurs with indianapolis 2004 !!! I also did the test with 2001 and it's OK. Finally, with 2002 and there is also an error. This proves what I have already mentioned. The test was performed on Win7 64bit. I don't know if on another systemby evroic - Grand Prix 3
Hi Mr. Quickslick Nice to see you here !!! The DAT files in the "7364-belini_indy_v52.rar" package have the same date / time and size as the DAT files you sent me. Even so I test each one and the same problem happens. I believe that the Dat used by Orloff to make the "Indy 2020" version is the same inside "belini indianapolis v8.0" => Note that botby evroic - Grand Prix 3
Hi Paul Right now I did a test on my good old PC GP32K + GPxPatch + 4.51 + Windows XP 7364-belini_indy_v52.rar 2000 - OK 2001 - OK 2002 - NOT OK 2003 - NOT OK 2004 - NOT OK 2005 - NOT OK belini_indianapolis_v8.rar => The v8 version requires "belini genjams 4" and I did that. 2000 - OK 2001 - OK 2002 - NOT OK 2003 - NOT OK 2004 - NOT OK 2005 - INDIANAPOLIby evroic - Grand Prix 3
* * * HANOI FIX * * * Only two types of problem with GP32K were detected in Win7 A- Only car 1 of team 1 is pink Solution: replace the "hanoi_trucks.jam" file B- Crash to Desktop Solution: replace the "116_palm1.jam" file Other problems have not been reported or are known at the time of this posting. These problems were not found in Windows XP, Windows 8by evroic - Grand Prix 3
* * * HANOI FIX * * * Only two types of problem with GP32K were detected in Win7 A- Only car 1 of team 1 is pink Solution: replace the "hanoi_trucks.jam" file B- Crash to Desktop Solution: replace the "116_palm1.jam" file Other problems have not been reported or are known at the time of this posting. These problems were not found in Windows XP, Windows 8by evroic - GP3 F1 Tracks
Hi Mr Degas, Thank you for your considerations. I am very happy to know that this case has been resolved and to have contributed in some way with my help. I have not forgotten that on several occasions you have shared your files with me and have helped me on other occasions. I'm just giving it back. I also thank everyone who taught me, helped and shared their knowledge and filesby evroic - Grand Prix 3
Hello everyone. I believe I discovered the cause of the problem but now I have a worse one !!!! I tested each of Belini's versions of Indianapolis (2000 to 2007) and the result was as follows. 2000 and 2001 there is no problem with pitbuilding but 2002 to 2007 all have the problem of 2004 since all have the same settings. No pitbuilding. So I did a check between 2001 and 2004 inby evroic - Grand Prix 3
Hi Degas I did the test in Slot 13 - GP3 2k I was the first to leave the pits and my qualify was in second position. I did a lap with a very high time to fall to the last position. As soon as I completed the lap I went to the pits with SHIFT + Q (I didn't even remember it anymore) and then put it in accelerated mode. I started at last position and after the first corners I left the gaby evroic - Grand Prix 3
Hi Degas Some considerations: The author Tsauer made this DAT for GP3 1.13 (note that inside the DAT it has Magic Data) In the "readme.txt" file he mentions that not yet tested on GP3 2k My configurations and tests: ( Win7 64bits ) GP3 1.13 + GPxPacth 4.23 => "Enable debug mode" + "log file verbosity: Low" + "Compatibity Use CPU All" + &quby evroic - Grand Prix 3
Hello Paul, pleased to see you here. Thank you for replying to my message. The problem in the 2004 DAT is already noticed when using the GP32k. It is true that my attempt was to change the value of the command using the trackeditor and then I inserted the magic data. After doing this I tested it again on GP32k and then the new problem was noticed. Your observations are very important,by evroic - Grand Prix 3
just this one .... When logging into your Win7 with which user are you logged in? On my machine my user is the Administrator. You said GP3 worked, do you still have the same user? Can you save screen prints? Anyway .... it's a lot to ask ....by evroic - Grand Prix 3
Hi Elio It may sound crazy, but do the following test. Let's see if your folder is allowing you to save files in txt format With windows explorer go to the Gpsaves folder, hold down the shift key and click the right mouse button When the menu appears, click on "open command window here" (I don't know how it is in English) maybe command line or command prompt Thiby evroic - Grand Prix 3
Hi Elio I did a test with your MOD 1984 and here it worked normally. I even saw that in the Gpsaves folder there are several files of yours. So I can understand that you are not managing to generate the TXT file with any installation you have, GP3 1.13 or GP3 2000, right? So I believe it is not the game .... You say you haven't done anything ... Have you tried a new installby evroic - Grand Prix 3
Hi Elio I also have Win7 64 bits and I can only save in TXT format. For that to happen I have to check the option "Print to file" If I leave this option unchecked and ask to print then open a screen asking for the name of the file to save in XPS format but I can't go back to the game anymore; It seems to be frozen. The game seems to go into a loop and I have to end itby evroic - Grand Prix 3
Hello everyone. As I mentioned in the previous message, the problem seemed to be related to the configuration of the command "? [0x9c] New GP3 Unknown" located in Sector 0 of the Track Data structure. Here's how far I got. PK Arnall's Indianapolis 2004 - original setup New setup made by me After many attempts the pit building can be seen. However, thby evroic - Grand Prix 3
Hello, here is Sherlock again with another case discovered !!! I am very happy with myself. Wow !!! Well, let's go. I installed Belini's original "209indianapolis2004.dat" track and that same problem also occurred. Orloff confirmed this in his message and I believe he used this DAT to make the 2019 and 2020 version of Indy. I kept thinking .... it must be someby evroic - Grand Prix 3
Hi Paul First of all thanks for having answered my message. Time really passes very quickly and we don't even realize it. Too bad you can't remember how you got that information that is posted in the log. We will wait for Dirk and René to solve this problem. Best regardsby evroic - Grand Prix 3
Hi Dirk The problem only occurs with the GP3 2000 !!! Right after the first corner and before the second the game crashes to desktop. To be very exact right after the white line between sectors 28 and 30. For me this same problem also happens with Korea 2011.dat and Korea2012.dat !!! I did a test without the JAM and JIP files and even then the problem continues. Just remembering thby evroic - Grand Prix 3
One more information In the file "gp3form.txt" Dirk gives the following information: * Construction * Base: Korea 2010 (Yeongam) by Scandura (thanks) So I decided to install Korea 2010 from Scandura on GP3 2000 and the error didn't happen. I will make a comparison between the DAT files and see what it can be. I still have no idea what it is but I want to know. As foby evroic - Grand Prix 3