In car set up GPx 3.40

Can anyone help me, i`ve started using GPx 3.40 and i can`t see the info for the in car set up options, it goes off the bottom part of the screen, does anyone know how to move it up the screen a little bit.

I`m using 1280x1024 res on a 19" monitor, don`t really want to go down to 1024x760.

Thanks PD1

PS. Did post this on SDI site but got no replies

slightly off the subject
How do you set the car up??
I can flick through the parts I can set up

e.g.break bias

but I can't select it to change set up

There is an ini file, where the positions of the GpxPatch TV gfx are stored (defpanel.ini?). Perhaps you have changed them, or deleted the file? If not, you could mess around with the values.

---

It's only after we've lost everything, that we are free to do anything.

This is from my defpanel.ini. from GPx data what do i change

[Misc]
ShowInCockpit=0
Font=manana
[Gear]
Enable=1
X=-6
Y=200
[Revs]
Enable=1
X=-6
Y=250
[Speed]
Enable=1
X=-6
Y=300
[Fuel]
Enable=1
X=-6
Y=350
[EngineTemp]
Enable=1
X=-6
Y=400
[Lap]
Enable=0
X=-6
Y=450
[Position]
Enable=0
X=-6
Y=500
[Pit]
Enable=0
X=-6
Y=550
UseBitmap=1

With F1 you can select what to change. With F3 you can decrease the set and with F4 you can increase them.

With the L Key you can select if you want to see the "setup menü" or not.

If you press the L key you can also see what settings ai cars use.




Join the biggest german speaking rpg community for Battlefield 1942 Modifikation "Forgotten Hope".

Visit www.fh-warzone.de for more informations.

They are a orginazed in coordinate system, with a vertical and horizontal axis, so change X and Y values. As to which of those and how much, I cannot tell you. I have not tried it before. But I did a bit of research and found that you can just edit them through the GpxCinfo tab. Btw, are you sure that the defpanel is activated there?

---

It's only after we've lost everything, that we are free to do anything.

PD1:

Check your post at SDI's forum. You may have found the answer by now anyway.