Image of the drivers' cars along with their position

Hello everybody.

I would like to put the images of the cars in place of the horizontal bars.

These images are for illustrative purposes only.



I have the images of the cars but I don't know how to associate the driver's position and make it show on the screen.

Has anyone done this before?

Thank you in advance for your help.

Evandro ( Brazil )

It's not possible to do it without implementing it in GPxPatch.

René Smit, Independent Software Developer.
Download my GPx tools here.

Hello René

Please, is there any chance to have this implemented in GPxPatch?

It would be really cool to have something like this in Classic mode like we have in Digital 2010

I'm using all these implementations and it's pretty good.

By the way, I also take the opportunity to ask you about the image below.



I needed to know how often the information that is in the right corner inside the square in GPxPatch is shown.

I made a setting through Enable Ranges - Edit Ranges which is very close but there is a delay.

Maybe I'll put this image along with the information or when it's not on the screen.

Please, can you help me ?

Thanks in advance and I hope we can have good news.

Evandro ( Brazil )

I'm not actively working on GPxPatch anymore...
The start and end is defined by the split segment and the speed trap width (default 50 segments, so from 50 before the split until 50 after).

René Smit, Independent Software Developer.
Download my GPx tools here.

I believe that at the moment there is no function in GPxPacth where I can take advantage of this trigger and show an image, right?

If there is, could you please show me the way?

I know I can have a picture depending on the team, the car and the track.

So I would just need this connection.... as is the case with the position for example....

Hope you come back to GPxPach. This tool is very good and many things could be added.

Thank you for that !!!

Evandro ( Brazil )

What you said with the ranges in GPxCInfo is the only way to trigger it. One segment is 16 feet, so you can convert between segments and meters.

René Smit, Independent Software Developer.
Download my GPx tools here.