Cockpits 2018 + halo

Posted by AugustoGibim 
Cockpits 2018 + halo
Date: April 21, 2018 06:26PM
Posted by: AugustoGibim
Hello everyone.

I'm working on the 2018 cockpits with halo
All shapes and textures are ready
When I insert the files into wad, the game crashes (gives a log message)
The original cockpit file is car_cockpit_00.gp4
So I created a logical sequence(???) for the shapes in the same way as the carshapes:
car_cockpit_mercedes_00.gp4
car_cockpit_redbull_00.gp4
car_cockpit_ferrari_00.gp4 (etc) and deleted the file car_cockpit_00.gp4
All shapes are there and all their wad files are there
Anyone know if it's possible to create individual cockpits?
I do not know where I'm going wrong.





Edited 2 time(s). Last edit at 04/23/2018 04:12PM by AugustoGibim.
Re: Cockpits 2018 + halo
Date: April 21, 2018 06:38PM
Posted by: kedy89
There can only be one. No team specific cockpit shapes, all share the same one (car_cockpit_00.gp4).



Some mods
::: F1 1996 ::: F1 2002 ::: F1 2007 ::: F1 2011 ::: F1 2013 ::: F1 2015 ::: F1 2018 :::

Some other stuff ::: Some more other stuff
Re: Cockpits 2018 + halo
Date: April 21, 2018 06:40PM
Posted by: gap177
Confirming Kedy's response. There can only be one. They do look great!! (Y)

Glenn (Cdn)



Edited 1 time(s). Last edit at 04/21/2018 06:40PM by gap177.
Re: Cockpits 2018 + halo
Date: April 21, 2018 08:35PM
Posted by: Maristella1965
Try to set 1 instead 0 in mesh cockpit (enable individual cockpit mesh).

[SYSTEM_TWEAKS_ENABLE]
HeadViewMove = 1 ; set to 1 to enable head view movement tweak
HelmetMoving = 1 ; set to 1 to enable helmet moving sensitivity tweak
OnboardCamera = 1 ; set to 1 to enable onboard camera position tweak
OnboardCamEdit = 1 ; set to 1 to enable onboard camera position edit mode
ViewAngleCam = 1 ; set to 1 to enable onboard camera view angle tweak
ViewAngleEdit = 1 ; set to 1 to enable onboard camera view angle edit mode
HelmetPos = 1 ; set to 1 to enable helmet position tweak
HelmetPosEdit = 1 ; set to 1 to enable helmet position edit mode
SteerPos = 1 ; set to 1 to enable external steer position tweak
SteerPosEdit = 1 ; set to 1 to enable external steer position edit mode
ArmsPos = 1 ; set to 1 to enable driver arms position tweak
ArmsPosEdit = 1 ; set to 1 to enable driver arms position edit mode
CptSteerPos = 1 ; set to 1 to enable cockpit steering-wheel position tweak
CptSteerPosEdit = 1 ; set to 1 to enable cockpit steering-wheel position edit mode
CptDashPos = 1 ; set to 1 to enable cockpit dash position tweak
CptDashPosEdit = 1 ; set to 1 to enable cockpit dash position edit mode
ArmsColors = 1 ; set to 1 to enable arms color tweak
RimsColors = 1 ; set to 1 to enable rims color tweak
TyrePos = 1 ; set to 1 to enable tyre position tweak
TyrePosEdit = 1 ; set to 1 to enable tyre position tweak
CptSteerLock = 0 ; set to 1 to enable cockpit steerwheel rotation locking tweak
QualRules2003 = 0 ; set to 1 to enable 2003 qualifying rules tweak
Pitstop = 1 ; set to 1 to enable pitstop timing tweak
RearLightBrake = 1 ; set to 1 to enable rear light braking tweak
AmbientPos = 1 ; set to 1 to enable rear light ambient position tweak
PitLimiter = 0 ; set to 1 to enable pit limiter tweak
SpeedLimit = 1 ; set to 1 to enable pit speed limit tweak
HelmetVisor = 1 ; set to 1 to enable visor on selected view modes
RainDroplet = 1 ; set to 1 to enable rain droplet on selected view modes
CarsEnabler = 1 ; set to 1 to enable car enabler tweak
SlipStream = 1 ; set to 1 to enable slipstream effect
SlipPlayer = 1 ; set to 1 to enable slipstream affect to player car only
FFEffect = 0 ; set to 1 to enable force feedback custom effects (GP4 v1.02 only)
FFEffectGP4v100 = 0 ; set to 1 to enable force feedback custom effects (GP4 v1.00 only, may not working properly!)
CustomVisor = 1 ; set to 1 to enable custom visor tweak
VisorDirtEffect = 1 ; set to 1 to enable dirt effect tweak (CustomVisor must enabled)
VisorDirtPlayer = 0 ; set to 1 to enable dirt effect drawn on player car only
MeshSteering = 1 ; set to 1 to enable individual steering-wheel mesh
MeshFrontWheel = 0 ; set to 1 to enable individual front wheel mesh
MeshRearWheel = 0 ; set to 1 to enable individual rear wheel mesh
MeshHelmet = 0 ; set to 1 to enable individual helmet mesh
MeshCockpit = 0 ; set to 1 to enable individual cockpit mesh
TyreWear = 0 ; set to 1 to enable adjustable tyre wear
MeshProtect = 0 ; set to 1 to enable encrypted GP4 *.gp4 mesh file supports
TextureProtect = 0 ; set to 1 to enable encrypted GP4 *.tex texture file support
Re: Cockpits 2018 + halo
Date: April 22, 2018 12:24AM
Posted by: AugustoGibim
I'll try! good sugestion
I still have to find out which sequence of nomenclature shapes:

car_cockpit_mercedes_00.gp4
car_cockpit_ferrari_00.gp4
car_cockpit_redbul_00.gp4 ...

or

car_cockpit_car0_00.gp4
car_cockpit_car1_00.gp4
car_cockpit_car2_00.gp4 ...

or another
Re: Cockpits 2018 + halo
Date: April 22, 2018 10:19AM
Posted by: munnzy
great idea, other wise why is there a

MeshCockpit = 0 ; set to 1 to enable individual cockpit mesh

as an option ??
good luck and keep us posted
regards to all
Re: Cockpits 2018 + halo
Date: April 22, 2018 06:24PM
Posted by: Alesi_fan
AugustoGibim Wrote:
-------------------------------------------------------
> I'm working on the 2018 cockpits with halo...
-----------------------------------------------
Good job on this but the mid part should be in a blur as the drivers focus is far of in to the corner.
It really only need a flat shape and not a 3d halo with a texture that looks like your 3d halo.

Maybe it should be even more blur on the middle bracket

[www.mediafire.com]



Edited 3 time(s). Last edit at 04/23/2018 10:03AM by Alesi_fan.
Re: Cockpits 2018 + halo
Date: April 22, 2018 06:55PM
Posted by: AugustoGibim
I wear glasses and I know it well
But here the image is not blurry and the cokpit is in 3D
See image 1 with Kubica, image 2 with F12017 and image 3 with AC
What I did was correct.
If I do not have the sequence of shape names the meshcockpit will have no effect.





Edited 4 time(s). Last edit at 04/22/2018 07:06PM by AugustoGibim.
Re: Cockpits 2018 + halo
Date: April 22, 2018 08:38PM
Posted by: BobT
Great Job Augusto.

I wait, soon, have the file or files from work and the tex.

It's wonderful.

Maravilhoso.

Fuerte abrazo.

BobT
Re: Cockpits 2018 + halo
Date: April 23, 2018 04:36AM
Posted by: pauloderpich
Great job Augusto as always!

Paulo
Re: Cockpits 2018 + halo
Date: April 23, 2018 12:40PM
Posted by: gezere
Yes a Great Job. (Y)

Unfortunately I am not sure that the GP4 tweaker's option works. If I am right nobody else tried it... and it was more a project (like different helmet shapes or stearing) than an available option. But I could be wrong (I hope)
I am not a tweaker or a CSM specialist but for sure the different names should have to be defined in a .ini file like cars, helmets,etc.... but I can't help you on this side.

We can see on the real cars, that the halo can have different colors. So, if GP4 can't be tweaked to handle individual cockpit shapes,
we could have the solution to map the shape of the halo somewhere in the cockpit textures (cp_xxxx.tex), then it will allow to paint individual colors for each team.

The dark side if this solution is, there are a lot of different generic cockpit shapes used by the community (a matter of taste) and this work will have to be done for each of them...

I plan to do it for K-Sor cockpit shape (the one I use), but obviously it is not your favorite shape... ;-)

I really hope, somebody will be able to provide the good way to implement individual cockpit shape in the game, but I have some doubts....





Edited 2 time(s). Last edit at 04/23/2018 12:46PM by gezere.
Re: Cockpits 2018 + halo
Date: April 23, 2018 04:09PM
Posted by: AugustoGibim
Hello Bernard

I think meshcockpit is not the way. I have tried without success.
I did just that. I mapped the halo inside cpt_jor_art2.tga. So it was possible to have the colors for each team.
But the halo has a unique color. I chose the predominant color of each car. The result was good.
If there is no other solution, I think this will be appropriate because of the limitations of the game.







Edited 1 time(s). Last edit at 05/03/2018 11:40PM by AugustoGibim.
Re: Cockpits 2018 + halo
Date: April 23, 2018 04:32PM
Posted by: Tobor
Great Job!! Congratulations and many thanks.

Bye
Tobor.
Re: Cockpits 2018 + halo
Date: April 23, 2018 04:33PM
Posted by: gap177
Thanks AugustoGibim!! Well done,,,,as usual!! (Y)

Glenn (Cdn)
Re: Cockpits 2018 + halo
Date: April 23, 2018 05:30PM
Posted by: gezere
Great Job Augusto.
I Like Kimi's version ;)
You could have a bi-color Halo (like Ferrari) or more by mapping different parts of the shape independently.
( For example, external side and internal side). But you need more free space on the texture...

This is what I will try for K-Sor cockpit shape but I am not sure to have a lot of free space available on the current arrangement of the texture.





Edited 1 time(s). Last edit at 04/23/2018 05:33PM by gezere.
Re: Cockpits 2018 + halo
Date: April 23, 2018 07:01PM
Posted by: Alessio88
thanks Augusto,looks great

Greetings
Alessio


CoM3 oN McL4R3n.....:)
Re: Cockpits 2018 + halo
Date: April 23, 2018 08:44PM
Posted by: Turbo Lover
Looks very good, well done!



My Grand Prix 4 Files

I'm a total dick. How many people can say that?
Re: Cockpits 2018 + halo
Date: April 24, 2018 02:08AM
Posted by: pauloderpich
Awesome work Augusto! Is there a chance to share that steerwhel as well?

Paulo
Re: Cockpits 2018 + halo
Date: April 24, 2018 08:46AM
Posted by: npnc
Good job.
Thank you very much.
Re: Cockpits 2018 + halo
Date: April 24, 2018 10:12AM
Posted by: Excalibur
Great job, Augusto! Congrats for this new feature integrated! (Y):-)

____________________________________________________________________________________________________________________________________________

Sorry, only registered users may post in this forum.

Click here to login

Maintainer: mortal, stephan | Design: stephan, Lo2k | Moderatoren: mortal, Vader, stephan | Downloads: Lo2k | Supported by: Atlassian Experts Berlin | Forum Rules | Policy