A black screen is a graphics issue. Is the graphics.cfg enabled? First line to 1, default is 0. Remove one graphics card and test. The resolution set on your monitor may not match the resolutions available to GP4, check the graphics cfg for available res. Set res and force using 1. Example
1 ; f1graphics.cfg controls all settings (default 0)
1920 ; [RELEASE] Game 3D Horizontal Resolution
1080 ; [RELEASE] Game 3D Vertical Resolution
1 ; [RELEASE] Enable 32bit mode if available NB. If Windowed then is forced to desktop format
1 ; [RELEASE] Enable hardware T&L if available
0 ; [RELEASE] Run in a window
0 ; [RELEASE] Number of multisamples if available (0-16 :: 0 => off, 1 unused)
0 ; [RELEASE] Force use of reference rasterizer
0 ; [RELEASE] Vsync (0=>off, or every nth frame) v2
73 ; [RELEASE] AutoPerformance (Automatic Performance Setting)
0 ; [RELEASE] TestedPerformanceLow (Tested Performance Setting)
0 ; [RELEASE] TestedPerformanceHigh (Tested Performance Setting)
1920 ; [DEBUG] Game 3D Horizontal Resolution
1080 ; [DEBUG] Game 3D Vertical Resolution
Starting from gpx_patch? cpu to 0, enable debugging, verbosity high.
[
www.mediafire.com] Some say you should click it, you know you want to.
[
www.gp4central.com] <----GP4 Central