belini 1.13?

once and for all, how can we play belini tracks on gp3 1.13? i have seen people discussing it but to be honest never really understood what changes need to be made.

thanks for any help in advance.
christopher

wanna know that too

As far as I know...

To make Belini's tracks run on GP3 1.13, you must reduce the track .DAT file size to a certain limit (don't remember now...) and it will run... Previous Sakhir and Shanghai worked for GP3 1.13 because their .DATs were smaller than the limit...

But Belini make his tracks with all sections with size 1 (I mean lots of tiny pieces of track, noticeable for a sideline not being 100% straight...) and lots of track commands (which means pit building, sceneries, etc...)

To delete some sectors (and make a single one with the size of those sectors) could be made, if the commands weren't attached to each specific sector... As I said, "as far as I know"...

GPGSL-3: Fox race driver and team manager - 2011-2012 Constructor Champion - 2012 Driver Champion

Season 9 - #18 Erick Von Draxeler - #35 Marcus Bongardt

The dat.file limit is 137 kB for 113, most belini tracks are bigger,
so you MUST reduce the dat.file to this limit, I delete some
"Internal Objects Definitions" in TrackEditor and remove all
far sights commands too.

Happy racing from Germany !!!

hi drafi
i'm not very used with track editor
first of all, what track editor do you mean?
paul hoad's or others?

then, please can you publish a little guide with steps and images on what to do about it?

thanks a lot, you site is great
Gennaro D'auria
f1gp3wc:
www.freewebs.com/f1gp3wc

I described it several times, but once again:
use Paul Hoad TrackEditor 2.2.0.804 to open the dat.file,
go to „Internal Objects Definitions“, remove the object
definitions, starting with the last one, until the dat size
is under 137 kB, save the dat.file from time to time and
look for the size. Maybe someone found a better way,
but this way worked for me, I heard about in the old GP2
trackediting forum (dinga ??) and tried it out.
The problem of this way are many graphical bugs, so the
much better way is to run GP3 2000 too.

Happy racing from Germany !!!

This is the way I do it :
open the DAT with paul hoad's trackeditor.
remove all trackwide changes via the menu 'remove'.
sometimes this is already enough (max tracksize = 140.000 bytes).
if not I remove all bankings by hand (takes some time!)
In this way I could get these tracks to run:
A1-ring,Bahrain,Barcelona,brazil,buenos aires,hungaroring,
magny cours,montreal,nurburgring,sepang,shanghai,suzuka

For some tracks I need to patch with 3.91.


greetz

holemad Wrote:
-------------------------------------------------------
> This is the way I do it :
> open the DAT with paul hoad's trackeditor.
> remove all trackwide changes via the menu
> 'remove'.
> sometimes this is already enough (max tracksize =
> 140.000 bytes).
> if not I remove all bankings by hand (takes some
> time!)
> In this way I could get these tracks to run:
> A1-ring,Bahrain,Barcelona,brazil,buenos
> aires,hungaroring,
> magny
> cours,montreal,nurburgring,sepang,shanghai,suzuka
>
> For some tracks I need to patch with 3.91.
>
>
> greetz

I'm suprised they run removing track width commands be safer to
remove banking commands

you only need to replace the magic data for:
buenos aires
hungaroring 98-2001
sepang 2000


pk

thanks for the info , Paul.
'removing track width' deletes 2 commands each sector,
and helps me getting easier the size limit.
After that, I set the bankings just were needed.

By the way : you made some great stuff!

what about 1.13 versions for monza,spa,silverstone,nurburgring new layout,
hockenheim,imola,indy,melbourne,monaco

any suggestions or tricks?
It's a pitty they don't work ..

But for me all 2007 tracks work with 1.13.

Happy racing from Germany !!!

The new Valencia track dosen't work in Gp3 1.13, for example...

-----------------------------------------------------

No problems here, Paulo.

Happy racing from Germany !!!

here too, i installed new valencia track without remove anything.

Okay. I got Valencia to work in slot 2. It’s a much nicer to drive than another version of the circuit I’ve tried.

I have been trying to download the track editor from the download page here but I keep getting error messages when I try to open the folder. Is there another place to download it from? Could someone mail it to me?

Thanks for all the interest and help.
christopher

where i can download TrackEditor 2.2.0.804?????

In the new download section > GP3 Editors/Utilities

Happy racing from Germany !!!

In the new download section > GP3 Editors/Utilities

Happy racing from Germany !!!

P.S. double post, had some troubles with my dial-up.





Edited 1 time(s). Last edit at 10/11/2007 04:52PM by drafi5.

Hi,
have a problem.
I reworked Spa 2007 by Belini to be under 137kB. It's ok - it's loading in GP3, but after I started the practice I notice that CC cars are runing out of fuel in the middle of third lap.
I have tried to insert some magic data but than the file had became corrupted (I can not load it anymore).
Anyone knows the solutions on how to change fuel consumption for CC cars?
Pep

@ peppekk:
Please check your mail.

Happy racing from Germany !!!