Michigan Track

Hi !!!!

I am looking for this track.

I only found this one: link

Tks

Evandro ( Brazil )



Edited 1 time(s). Last edit at 03/02/2016 06:43AM by evroic.

unless someone made an update, this is the only track available

It is not work with me.... ( I am playing GP3 1.13 Novice Mode Win XP )

I did what is inside txt.... see:

* Installation *

1) Copy the Michigan.dat file on your Gp3\Circuits directory.

2) HW: Copy all the other files in your Gp3\Gp3jamsH\Mic3jam directory.

3) Gp3: Install Michigan.md in Michigan.dat file, using Cmagic by Marc Aarts
Gp3 2000: Magic data already included in the track file.

4) Configure GPxPatch\GPxTrack.

* Other Information *

This track is programmed to be used at the ace level. It was designed under Gp3 2000 and Windows XP. It should work in Gp3 1.00 and 1.13 and/or other Windows versions

But there is this information....

Does it work with you ?
or
I have to do some change....

Tks

Evandro ( Brazil )

I did an update years ago, and it works.
As soon as i find it i'll post in the download section.
Bye

Yes....

I will be waiting and thank you for your attention.

Evandro ( Brazil )



Edited 1 time(s). Last edit at 03/02/2016 11:19PM by evroic.

Guys please be patient... i did forget to post the track...

no harm done, claudio, take your time

As Freddy said... i'm a great pretender...
I promise today i'll upload the track.




Edited 1 time(s). Last edit at 03/14/2016 11:29AM by savinaclaudio.

As promised, soon avalaible Michigan track.
You'll find it in the download section "Cart and other tracks".
Let me know.
Bye

Hi Claudio !!!

It is not good to me.... crash as soon as I start...

What can it be ?

Tks

Evandro ( Brazil )

works fine, be sure to have the jams in the gp3jamsh folder, *.dat file is ok !
or tell us when exactly you get the ctd

I did exactly what the gp3form.txt ask to do...

* Installation *

1) Copy the Michigan.dat file on your Gp3\Circuits directory.

2) HW: Copy all the other files in your Gp3\Gp3jamsH\Mic3jam directory.

3) Gp3: Install Michigan.md in Michigan.dat file, using Cmagic by Marc Aarts
Gp3 2000: Magic data already included in the track file.

4) Configure GPxPatch\GPxTrack.

* Other Information *

This track is programmed to be used at the ace level. It was designed under Gp3 2000 and Windows XP. It should work in Gp3 1.00 and 1.13 and/or other Windows versions

I am playing GP3 1.13 - Novice Mode - Win XP - GpXPatch 4.23

Enable Debug Mode and Low Log File Verbosity
Max Track Length 8Km

The same setup and the other 15 tracks are all okay.

only Michigan...

When the circuit is loaded, the five red lights will lighting ... afer the last, it will show the cars on the grid... but it does not happen and the game crash....

Sometimes even shows cars on the grid, but soon after the start of the race... the game crash...

What can it be ?

Tks

Evandro ( Brazil )

Hi guys !!!

Inside the DAT I found 27 JAM.
The folder mic3jam have only 21.....
It is missing 6....

Here are 5:

LINE 10 - micpitw1.jam
LINE 11 - micpitw2.jam

LINE 23 - exhib1.jam
LINE 24 - mark1.jam
LINE 25 - mic_tv.jam

and the last...

LINE 31 AND LINE 86 - scafside.jam appears twice....

Evandro ( Brazil )

After some test.....

The problem occours when I start at the last position on grid.... the game crash....

Testing Lap OK
Qualify OK
Pole Position OK

I REALIZED THAT THE PROBLEM MAY BE ON GRID.... WHEN I HAVE MANY CARS IN FRONT OF ME..... I TESTED WITH 6 ON GRID AND OK..... 12... 15... 22.... CRASH...

Evandro ( Brazil )

i had something similar once, when one of my car liveries went corrupt. re-installing the carset did help me

Just a tip :

This track is programmed to be used at the ace level. It was designed under Gp3 2000 and Windows XP. It should work in Gp3 1.00 and 1.13 and/or other Windows versions

I am playing GP3 1.13 - Novice Mode - Win XP - GpXPatch 4.23

I don't think the jams are an issue : you can drive a track with no jams, you only have walls with strange colors on them.

---

Hi.
The jams are not the problem. As EricMoinet said, you can drive a track without jams: you will not see the graphics, but the track works.
I did practice, qual and races on Michigan, never had problems. Never tested starting from the last position of the grid, i'll test it.

@evroic: about the number of jam files in the folder: i usually modify the track graphic, so that maybe some jam is no more useful for my version and i delete them. Sometimes i found tracks using jam files which where not present in the folder, and i added them.
You can use a track in whatever level you like, the problem is related to the MD file: so if the MD is programmed to be used in ace level and you race in other levels, the performance of the CCs will not be realisti. But the track works.

Many times custom tracks are conversions of Gp2 custom tracks, and have some issues: Michigan had a problem with a "bump" in one of the corner (i don't remember which) that always made the car uncontrollable.
And sometimes yes, i have found the same command repeted twice or three times, and the same for the jam files: but this kind of issue usually create a graphic bug.

And yes, expecially on custom tracks carshapes can create a lot of problems: usually a good old CTD (for example: Monaco, Adelaide, sometimes Montreal custom tracks).
Bye

Tested: no problem starting from 22nd on the grid.
But as i say, different PCs different issues...
Bye