1983Trackpack

Hi Dirk,

Using an old tread again, sorry... I have the same problem again with Zandvoort 1985 version as with the 1983 version.
I think you sent me the .dat file and a jam file back then, and perhaps I can ask you to send the 1983 version to me again as my files were overwritten in order to revert to 1983 trackpack..?

Best regards


holemad Wrote:
-------------------------------------------------------
> I didn't have a ctd on zandvoort, but armcos had
> all different kinds of textures on it.
>
> I took the jam 'fence9' and exported it, cut out
> the armco and resized to 256x64, then loaded this
> new texture with jam id 202 underneath 201 in
> 'fence9'.
> In trackeditor in sector t0 add 2 cmds : scenery
> definition left fence + scenery definition right
> fence, and use jam id 202 for these cmds.
> delete the 2 existing armco textures in the jam
> files tree.
> save it again and drive...
>
> a little workshop c'mon

i'll have a look soon. don't worry (y)

I too can not run Zandvoort without it crashing just after the loading screens finish and the in-game sound begins.

Can you help?

Thanks,

Elio

the same here, elio, i had it once myself, and the next time it was ok, without changing a thing.

I updated both versions 1983 and 1985 (as described) so they will show the armcos as wanted.
Hopefully, the track is loading fine now for you.

@elio2013: can you send a mail to dirkholemans@telenet.be so i can reply with the new files?



Edited 1 time(s). Last edit at 01/22/2015 08:29PM by holemad.

I do not understand how there can be this problem, I'm sorry! You remember to unzip the "Armco" folder in Gp3jamsH folder of your Gp3, and unzip the jip files of "genjam" folder in Gp3jams \ genjam folder of your Gp3. Unzip the other folders of "gp3jams" (san3jams, jaca80, etc.) in the gp3jams folder of your gp3. Also some circuits load in "debug mode". Finally, to me, for example, to load Silverstone before I open a practice session and only after charging directly in "quick race". The files contained in the folder jam "fix" serve in case you play with GP3 1.13 (that shows the famous square blacks). Now I write the same thing for TP85.

holemad Wrote:
-------------------------------------------------------
> the same here, elio, i had it once myself, and the
> next time it was ok, without changing a thing.
>
> I updated both versions 1983 and 1985 (as
> described) so they will show the armcos as
> wanted.
> Hopefully, the track is loading fine now for you.
>
> @elio2013: can you send a mail to
> dirkholemans@telenet.be so i can reply with the
> new files?

Personal email sent, cheers!

I have Zandvoort running fine using files from Holemad. Thanks!

@ ettore : no need to sorry, mate, you did a great job, believe me.

For armcos, i always need to use these scenery definitions for left/right fence, and i guess this has to do with my nvidia.
(even the original gp3 tracks are not ok!)
At zandvoort specifically, there were showing trees instead of armcos, probably due to overlapping id's.
Thats why i made a new armco with id 202 and used that one.

keep it up

Hi all friends !!!

I downloaded this package and realized that there are some bugs ...

As I do not have the technical knowledge to make changes in dat files I wonder if there is a settings package for the errors found in order to upgrade.

I read in previous posts that were found errors in circuits of Detroit and Zandvoort ....

Finally, someone has the necessary updates to fix these errors?

awaiting...

tks

Evandro ( Brazil )

I did an update for the zandvoort 83 track and a few of the 1985 tracks with also detroit in it.
I've sent you those just in case.

The rest of the tracks might be something for the long winter days.

Evroic, you put here a screenshots of bugs or send me them by e-mail