Hello, it' me again... Meanwhile I have tried everything to find a configuration for my wheel, but I do not find one... The breaks do not work...! Everything else is fine (steering, accelerating, shifting), but I find no setting how the breaks do work! Can anyone help me??? Or can you send me your settins via mail so that I can try them out? (mail to smallyseba@gmx.de) Thank you all for yoby smallyseba - Grand Prix 3
yes that's right: when i come to calibrate the wheel, it shows me that the irz axis is used for braking. In the calibration his works finde, but in the game, the brake does not react, only the wheel (left/right) and the throttle (right pedal) do work! What can I do?by smallyseba - Grand Prix 3
Hi, i've been searching for hours all around the internet and this forum, but didn't find any solution, so here's my question: I needed to install my GP3 on a Windows 7 system now. Everything works fine, but the game does not install my steering whell correctly. In the steering calbration, it gives me the correct axes (X/Y) for steering, shifting, pit stop etc., but the brakinby smallyseba - Grand Prix 3
hi, can you send me the link too? smallyseba@gmx.de thanks a lot!by smallyseba - Grand Prix 3
hi, can you please send it to me too? smallyseba@gmx.de thanks!by smallyseba - Grand Prix 3
I think I have found a solution: my screen setup menu gives an otpion to set the size to "widescreen" OR "automatic". on "automatic, it gives me black bars on the left and on the right, so that I can play gp3 in "normal" resolution without stretching! thanks for your help, guys! Sebastianby smallyseba - Grand Prix 3
i'm sorry, I didn't find this graphics.cfg... maybe it's in gp4...?by smallyseba - Grand Prix 3
I can also send you screenshots if you want to...by smallyseba - Grand Prix 3
Hi everybody, I searched all over the forum, but could not find a solution to my problem: I habe a new flatscreen monitor (24" and now my gp3 1.13 looks a bit "stretched" because I run the monitor on 1920x1080 how can I adjust gp3 so that I can have a "normal" look at it again? It would also be okay for me if there are black spaces on the left and on the right, but notby smallyseba - Grand Prix 3
Hi Guys, great work, these T-Cams! I love the screenshots! But: I did not right understand how I can insert the files into my gp3? can you help me with it? I have downloaded all the files... Thanks a lot!by smallyseba - Grand Prix 3
press alt+tab when the game is about to start, and close the game by right-clicking on the windows-bar below (right click on gpxpatch => close) then start it again, it should work then (I always do so...)by smallyseba - Grand Prix 3
hi dirk, thanks for the track, but it always crashes to desktop on the long straight in sector 2 (behind the pit building). both dat-files of the track have the problem. is there anything I can do? thanks! Sebastianby smallyseba - Grand Prix 3
hi, can anyone send me a good working sakhir track, please? thanks a lot! smallyseba@gmx.deby smallyseba - Grand Prix 3
Hi, I don't find the genjams4 or the orginal melbourne file... Can anyone send me all the necessary files for the melbourne track via mail or tell me where I can find them? smallyseba@gmx.de Thanks a lot!by smallyseba - Grand Prix 3
thanks for everything, rob!by smallyseba - Grand Prix 3
Hi to all, As I understand, the grip patch is campatible to gp3 1.13? if this is right, can anyone send me this grip patch via email, too? my adress: smallyseba@gmx.de thanks a lot!by smallyseba - Grand Prix 3
can anyone send me a working version of spa (new layout) for gp3 1.13? Thanks a lot! smallyseba@gmx.deby smallyseba - Grand Prix 3
I just send you both tracks requested, check your mail! By the way: can anyone send me a working version of istanbul for gp3 1.13? this would be great! my mail: smallyseba@gmx.de Thanks in advance!by smallyseba - Grand Prix 3
thank you very much for the great tracks!by smallyseba - Grand Prix 3
I have problerms with the graphics.... I see grey and blue lines instead of track adverts or objects around the track... although I installed everything properly... any ideas?by smallyseba - Grand Prix 3
Wow! It would be great to change the tyre values! so far, I always had the problem in GP3 that my laptimes became slower at the end of each stint (just before the pitstop) because of the tyre wear... unfortunately I'm not able to create such an editor... sorry!by smallyseba - Grand Prix 3
can anybody tell me the values for a helicopter cam view? thanks in advance!by smallyseba - Grand Prix 3
I think you have done everything right! The fact ist that the graphical engine of gp3 changes all graphics that are far away from your own car to the normal "basic" graphics, in order to to save resources. So you see the "new" shape if you are dircectly in front or behind another car. those who are far away look like the normal carshape.by smallyseba - Grand Prix 3
Hello everybody, I'm very busy editing my Grand Prix 3 (v. 1.13) to 2009 season. I have taken drafi's update which works very well, but I have a question to you all: To reach more realistic laptimes, I have raised the grip/performance values (normally around 16.000 for each driver) to 18.000-19.000. Like this, the computer cars have "real" laptimes (like 1:26 minutes in Meby smallyseba - Grand Prix 3
I have a map of the new Spa layout. If anyone wants to make the changes in an existing track file, just write me a mail and I will send you the map... smallyseba@gmx.deby smallyseba - Grand Prix 3
go to the "miscellaneous" section in gp3Edit and set the option "car power team dependant" then you will have the same power as your team mate!by smallyseba - Grand Prix 3
I do it like you (all cars, time limit 15 minutes) this is interesting because it often happens that a top-car does not qualify on a top position because slow cars block the track for the faster ones. This results in more exciting races!by smallyseba - Grand Prix 3
look on drafis page in the "misc" section! have fun!by smallyseba - Grand Prix 3
where can we download this track?by smallyseba - Grand Prix 3