Multiple Controller Issues

First problem:

I have 3 input devices:
- Simucube OSW
- Fanatec Clubsport V3
- SRC GT1 rim (SLI-Pro button box connected via USB)

As you are aware, only 2 input devices are supported. However, there are programs that can help with combining them somehow. Which is the best to use - especially from a GP4 POV - and is there something specific I need to keep in mind?


Second problem: My Clubsport V3s are inverted in GP4, i.e. 100% throttle equals 0% in-game, and vice versa. Can I invert them somehow for use with GP4?



Edited 1 time(s). Last edit at 03/25/2024 01:49PM by Ho3n3r.

Just bumping this to see if anyone can assist with the above.



Edited 1 time(s). Last edit at 03/25/2024 01:49PM by Ho3n3r.

Bump in case someone has had to do this.



Edited 1 time(s). Last edit at 03/25/2024 01:49PM by Ho3n3r.

I'm using a Fanatec CSL Elite F1 (it's a bit older already, 2018 oder 2019 maybe) and never faced any issues. I just did the usual calibration in GP4 and it worked. Just had to set the FFB at ~40% because else it would be way too hard.
However, there are several Fanatec Apps where you can change some settings of your device, like the degrees of rotation, etc. Maybe you'll find anything there?

---

GP Files | GP Videos | Discord: Carl_gpgames#2350

Carl_gpgames Wrote:
-------------------------------------------------------
> I'm using a Fanatec CSL Elite F1 (it's a bit older
> already, 2018 oder 2019 maybe) and never faced any
> issues. I just did the usual calibration in GP4 an
> d it worked. Just had to set the FFB at ~40% becau
> se else it would be way too hard.
> However, there are several Fanatec Apps where you
> can change some settings of your device, like the
> degrees of rotation, etc. Maybe you'll find anythi
> ng there?


Thanks. But the game only supports 2 devices simultaneously - I have 3. I know you can combine controllers with some apps but I have no idea which is the best, including the paid apps. The issue is to combine 2 of these devices into 1, I'm thinking the rim and the pedals since I still want the FFB, but I'm not sure if this approach would make sense.

And then the pedals inversion - I dunno if one of these apps can do that as well?

i don't know it either since I never had any issues why don't you try it?

---

GP Files | GP Videos | Discord: Carl_gpgames#2350

Was fiddling for hours last night with x360xe - game just doesn't detect it.

Also tried Xpadder, can't combine controllers.

Will try some other options.

Managed to get it working by using 3 tools:
- vJoy
- Joystick Gremlin
- HidHide Configuration Client - only reason I needed this is because I couldn't get HidGuardian to work, and this allowed me to disable the devices I wanted to assign in Joystick Gremlin as the virtual joystick buttons/axii, and when I re-enabled them, they were ID 3 and lower, enabling my virtual joystick as well as SimuCube base to be at the top in USB Game Controllers in Windows 11, allowing the game to use them as Controller A and B.

So all is working perfectly now.

Thanks @Carl_gpgames for your inputs, it all helped me get there in the end.



Edited 1 time(s). Last edit at 03/27/2024 10:35PM by Ho3n3r.