my f1graphics.cfg for ATI Radeon 9600 Pro

Posted by CorruptCop 
Forum List Message List New Topic
my f1graphics.cfg for ATI Radeon 9600 Pro
Date: June 27, 2005 12:24AM
Posted by: CorruptCop
Hi

This is the most effective f1graphics.cfg file i could make for my ATI Radeon 9600 Pro with Catalyst drivers v.5.5, everything else on the net just did not work for me, with this file, my processor occupency does not go above 80%.

[Cut the section below and preplace contents of your current f1graphics.cfg file]


0 ; f1graphics.cfg controls all settings (default 0)
1024 ; [RELEASE] Game 3D Horizontal Resolution
768 ; [RELEASE] Game 3D Vertical Resolution
1 ; [RELEASE] Enable 32bit mode if available NB. If Windowed then is forced to desktop format
1 ; [RELEASE] Enable hardware T&L if available
0 ; [RELEASE] Run in a window
0 ; [RELEASE] Number of multisamples if available (0-16 :: 0 => off, 1 unused)
0 ; [RELEASE] Force use of reference rasterizer
0 ; [RELEASE] Vsync (0=>off, or every nth frame) v2
73 ; [RELEASE] AutoPerformance (Automatic Performance Setting)
0 ; [RELEASE] TestedPerformanceLow (Tested Performance Setting)
0 ; [RELEASE] TestedPerformanceHigh (Tested Performance Setting)
800 ; [DEBUG] Game 3D Horizontal Resolution
600 ; [DEBUG] Game 3D Vertical Resolution
1 ; [DEBUG] Enable 32bit mode if available NB. If Windowed then is forced to desktop format
1 ; [DEBUG] Enable hardware T&L if available
1 ; [DEBUG] Run in a window
0 ; [DEBUG] Number of multisamples if available (0-16 :: 0 => off, 1 unused)
0 ; [DEBUG] Force use of reference rasterizer
0 ; [DEBUG] Vsync (0=>off, or every nth frame) v2
153 ; [DEBUG] AutoPerformance (Automatic Performance Setting)
0 ; [DEBUG] TestedPerformanceLow (Tested Performance Setting)
0 ; [DEBUG] TestedPerformanceHigh (Tested Performance Setting)
0 ; Texture quality : 0 => max 2 => half 4 => qtr 8 => eigth
1 ; Increase car texture quality (1 on, 0 off)
0 ; Low track geometry (1 on, 0 off)
0 ; Crude quadtree cull only (0=> off, 1=>always, 2=>only for TNL); recommended for fast gfx, low cpu
0 ; Number of mipmaps (0 => off) v2
1 ; Use compressed textures if supported
0 ; Full 32bit textures
7 ; Set 0 => no 8bit alpha (all stencil - yuck) 8 => all 8bit alpha (no stencil - nice) else 1-7 as cut off
1 ; If using compressed then ramp 1bit DXT1 to nbit DXT5 to avoid edge bleed v2
1 ; Render targets must match the main formats v2
1 ; Enable Fogging
1 ; Enable AdvancedCarShader v2
1 ; Pre-light track (Update track lighting using CPU)
0 ; Low res geometry track (1 low res, 0 normal)
1 ; Rotate wheels via textures v2
0 ; Bump map track (requires DP3; 0 => off)
4 ; Load balance : Frames over which to sample occupancy
110 ; Load balance : Start load decrease if occupancy over this
90 ; Load balance : Start load increase if occupancy under this v2
75 ; Load balance : Speed of load decrease ( < slower > faster)
33 ; Load balance : Speed of load increase ( < slower > faster)
0 ; Enable mirrors
2 ; Angle left mirror 0(in)-16(parallel)-32(out) v2
2 ; Angle right mirror 0(in)-16(parallel)-32(out) v2
16 ; Magnify mirror (16 => normal <16 wide >16 zoom)
133 ; Show own car (0 never, bit 1 trans, bit 2 solid, bit 3 context only bit7-fullpolycar in tcam) v3
1 ; Overide show own car if mirrors set low
100 ; Cockpit zoom (0 to 100) v2
1 ; Enable external view mirrors (0 0ff, 1 onboard, 2 all external views) v2
0 ; Enable track map (0 off, 1 arcade views only, 2 all non trackside)
9 ; Num overdraws for blur effects (eg reflections) Should be one of {2,4,6,9,12,16}
0 ; Reflect effect (0 => none-very sharp reflections), 1 => mipmapfilter, 2 => overdraw(best), 3 => hardwareboxfilter, 4 => swmungefilter(2nd best-best for 16bit), 5 => jitter(GP3 stylee) v3
512 ; If Jitter, how many ?
60 ; For normal reflections scale LOD (0 to 100%) v3
20 ; For blured effect reflections scale LOD (0 to 100%) v3
1 ; Maximum allowed heat hazes in a single view v2
0 ; Haze size in pixels : 0 => auto as proportion of main resolution (recommended)
1 ; Enable rain droplets on lens/visor
0 ; Enable visor when in cockpit view
1 ; Enable sky messages
1 ; Enable true type fonts
1 ; Environment map strength (0=>use game default)
0 ; Full dynamic video walls v2
30 ; Velocity m/s at which dynamic video walls are disabled (0 => no cutoff)
0 ; Size of video wall textures (dynamic) 0=>auto scale to game resolution
200000 ; Number of particle time slices per second.
0 ; TV style overlays on track cameras.
24 ; Multiplayer overlays 1:on 2:+cockpit 3:+allviews 4:+text 5:+gfx 6:+allcars
4 ; Multiplayer overlays - show for N closest
0 ; Enable user-defined gamma ramp v2
100 ; Gamma ramp for Reds (min value) range signed : 0-200 => -1 to 1 v4
200 ; Gamma ramp for Reds (max value) range signed : 0-200 => -1 to 1 v4
200 ; Gamma ramp for Reds (pow value) range signed : 0-200 => -1 to 1 v4
100 ; Gamma ramp for Greens (min value) range signed : 0-200 => -1 to 1 v4
200 ; Gamma ramp for Greens (max value) range signed : 0-200 => -1 to 1 v4
200 ; Gamma ramp for Greens (pow value) range signed : 0-200 => -1 to 1 v4
100 ; Gamma ramp for Blues (min value) range signed : 0-200 => -1 to 1 v4
200 ; Gamma ramp for Blues (max value) range signed : 0-200 => -1 to 1 v4
200 ; Gamma ramp for Blues (pow value) range signed : 0-200 => -1 to 1 v4
131 ; Enable cockpit gamma 0 off,1 player for all, 2 player for player only, 3 driver specific. Bit 7 (only when visor on) v2
100 ; Cockpit Gamma ramp for Reds (min value) range signed : 0-200 => -1 to 1 v3
190 ; Cockpit Gamma ramp for Reds (max value) range signed : 0-200 => -1 to 1 v3
190 ; Cockpit Gamma ramp for Reds (pow value) range signed : 0-200 => -1 to 1 v3
100 ; Cockpit Gamma ramp for Greens (min value) range signed : 0-200 => -1 to 1 v3
190 ; Cockpit Gamma ramp for Greens (max value) range signed : 0-200 => -1 to 1 v3
190 ; Cockpit Gamma ramp for Greens (pow value) range signed : 0-200 => -1 to 1 v3
100 ; Cockpit Gamma ramp for Blues (min value) range signed : 0-200 => -1 to 1 v3
190 ; Cockpit Gamma ramp for Blues (max value) range signed : 0-200 => -1 to 1 v3
190 ; Cockpit Gamma ramp for Blues (pow value) range signed : 0-200 => -1 to 1 v3
64 ; Size in texels for shadows over each car v2
256 ; Size in texels for projected shadows under each car
256 ; Size in texels for blurred projected shadows under each car
0 ; Attempt to page the over shadows
0 ; Attempt to page the under shadows
1 ; Animation rendering mode. (0 - cheap lighting, 1 - proper lighting, 2 - VS) v2
2 ; [MAIN VIEW] Texture filter quality (0 => none, 1 => point, 2 => bilinear, 3 => anisotropic, 4 => flatcubic, 5 => gaussiancubic) v3
0 ; [MAIN VIEW] Texture filter quality for mipmaps - if any - (0 => none, 1 => point, 2 => bilinear, 3 => anisotropic, 4 => flatcubic/quincunx, 5 => gaussiancubic) v3
1 ; [MAIN VIEW] Max anisotropic filtering (1 => off, to max 7) v2
92 ; [MAIN VIEW] Mipmap bias (0 => -8 to 200 => +8) -ve=> sharper v2
2500 ; [MAIN VIEW] Distance cull ALL track objects past this distance (overides LOD, 0 => off) v2
5 ; [MAIN VIEW] Fade out (cull) track objects band depth as % of cull distance (0 => immediate at cull point)
100 ; [MAIN VIEW] Scale track LOD distance - make larger to force lower LOD earlier
0 ; [MAIN VIEW] Constant min distance in metres for track LOD calcs - make larger to force lower max LOD - else 0 for full LOD range
300 ; [MAIN VIEW] Threshold distance in metres to switch in low LOD track
1 ; [MAIN VIEW] Display track shadows
1 ; [MAIN VIEW] Shadow type (under cars) (0=> off, 1=> static, 2=> composite, 3=> projected)
0 ; [MAIN VIEW] Blur shadows (projected shadows only)(should be 0 (no blur),2,4,6,9,12, or 16)
4 ; [MAIN VIEW] Max number of shadow maps that are allowed in view UNDER CAR
4 ; [MAIN VIEW] Max number of shadow maps that are allowed in view OVER CAR
1 ; [MAIN VIEW] Enable wet weather reflections (if main view is disabled, then all views are disabled)
400 ; [MAIN VIEW] Reflect static objects within this distance (0 => off) v3
1 ; [MAIN VIEW] Reflect cars in wet track
1 ; [MAIN VIEW] Reflect car particles (broken subassemly) in wet track v3
1 ; [MAIN VIEW] Enable static environment reflections (0=>off 1=>on) v3
200 ; [MAIN VIEW] Enable dynamic environment reflections to X metres (for advanced carshader only) v3
0 ; [MAIN VIEW] Max number of dynamic envmaps to use (1 to 22(!), 0=>off - for advanced carshader only) v3
1 ; [MAIN VIEW] Draw Particles
1 ; [MAIN VIEW] Draw rain (0 => off, 1 => on)
1 ; [MAIN VIEW] DrawBrakeGlows (0 => off, 1 => on)
1 ; [MAIN VIEW] DrawExternalSteering (0 => off, 1 => on)
1 ; [MAIN VIEW] Draw crowds (0 => off, 1 => on, 2 => on and animating)
11 ; [MAIN VIEW] Draw X objects in pit lane (0 => off, else max number of 'teams' to draw)
1 ; [MAIN VIEW] Draw crowd camera flashes
1 ; [MAIN VIEW] Draw sky
0 ; [MAIN VIEW] Draw heat haze v3
1 ; [MAIN VIEW] Draw lens flare (0 => off, 1 => 'real' camera views only, 2 => all views but cockpit, 3 => always)
1 ; [MAIN VIEW] Draw Bushes
1 ; [MAIN VIEW] Draw trackside cameras
1 ; [MAIN VIEW] Draw trackside cranes
1 ; [MAIN VIEW] Draw distant buildings
1 ; [MAIN VIEW] Draw near buildings
1 ; [MAIN VIEW] Draw horizon strips
1 ; [MAIN VIEW] Draw trackside photographers
1 ; [MAIN VIEW] Draw track (0 => off, 1 => basic, 2 => with detail maps)
1 ; [MAIN VIEW] Draw trackside platforms
1 ; [MAIN VIEW] Draw videowalls
1 ; [MAIN VIEW] Draw Misc. trackside objects
1 ; [MAIN VIEW] Draw trackside fences
1 ; [MAIN VIEW] Draw trackside walls
1 ; [MAIN VIEW] Draw track kerbing
1 ; [MAIN VIEW] Draw bridges
1 ; [MAIN VIEW] Draw Near stands
1 ; [MAIN VIEW] Draw Far stands
1 ; [MAIN VIEW] Draw Near land
1 ; [MAIN VIEW] Draw Far land
1 ; [MAIN VIEW] Draw track marshalls
1 ; [MAIN VIEW] Draw large trackside signs
1 ; [MAIN VIEW] Draw small trackside signs
1 ; [MAIN VIEW] Draw Near trees
1 ; [MAIN VIEW] Draw Far trees
1 ; [MAIN VIEW] Draw video-wall screens
1 ; [MAIN VIEW] Draw shadows on track v2
1 ; [MAIN VIEW] Draw Required trackside buildings
70 ; [MAIN VIEW] Car lod : load balance as % of notional max possible number of car polys (at highest LOD) v9
100 ; [MAIN VIEW] Car lod : maximum LOD (scalar 100=>1) v2
1000 ; [MAIN VIEW] Car lod : distance at which to cull cars in view (metres) v3
100 ; [MAIN VIEW] Car lod : scalar
1 ; [MAIN VIEW] If using advanced car shader, then we can also (optionally) use improved wheel lighting
2 ; [MIRROR VIEW] Texture filter quality (0 => none, 1 => point, 2 => bilinear, 3 => anisotropic, 4 => flatcubic, 5 => gaussiancubic) v3
0 ; [MIRROR VIEW] Texture filter quality for mipmaps - if any - (0 => none, 1 => point, 2 => bilinear, 3 => anisotropic, 4 => flatcubic/quincunx, 5 => gaussiancubic) v3
1 ; [MIRROR VIEW] Max anisotropic filtering (1 => off, to max 7) v2
115 ; [MIRROR VIEW] Mipmap bias (0 => -8 to 200 => +8) -ve=> sharper v2
812 ; [MIRROR VIEW] Distance cull ALL track objects past this distance (overides LOD, 0 => off)
5 ; [MIRROR VIEW] Fade out (cull) track objects band depth as % of cull distance (0 => immediate at cull point)
183 ; [MIRROR VIEW] Scale track LOD distance - make larger to force lower LOD earlier
93 ; [MIRROR VIEW] Constant min distance in metres for track LOD calcs - make larger to force lower max LOD - else 0 for full LOD range
50 ; [MIRROR VIEW] Threshold distance in metres to switch in low LOD track
0 ; [MIRROR VIEW] Display track shadows
1 ; [MIRROR VIEW] Shadow type (under cars) (0=> off, 1=> static, 2=> composite, 3=> projected)
0 ; [MIRROR VIEW] Blur shadows (projected shadows only)(should be 0 (no blur),2,4,6,9,12, or 16)
2 ; [MIRROR VIEW] Max number of shadow maps that are allowed in view UNDER CAR
2 ; [MIRROR VIEW] Max number of shadow maps that are allowed in view OVER CAR
0 ; [MIRROR VIEW] Enable wet weather reflections
50 ; [MIRROR VIEW] Reflect static objects within this distance (0 => off)
0 ; [MIRROR VIEW] Reflect cars in wet track
0 ; [MIRROR VIEW] Reflect car particles (broken subassemly) in wet track v2
0 ; [MIRROR VIEW] Enable static environment reflections (0=>off 1=>on) v3
0 ; [MIRROR VIEW] Enable dynamic environment reflections to X metres (for advanced carshader only) v3
0 ; [MIRROR VIEW] Max number of dynamic envmaps to use (1 to 22(!), 0=>off - for advanced carshader only) v3
0 ; [MIRROR VIEW] Draw Particles
0 ; [MIRROR VIEW] Draw rain (0 => off, 1 => on)
0 ; [MIRROR VIEW] DrawBrakeGlows (0 => off, 1 => on)
0 ; [MIRROR VIEW] DrawExternalSteering (0 => off, 1 => on)
0 ; [MIRROR VIEW] Draw crowds (0 => off, 1 => on, 2 => on and animating) v2
1 ; [MIRROR VIEW] Draw X objects in pit lane (0 => off, else max number of 'teams' to draw) v2
0 ; [MIRROR VIEW] Draw crowd camera flashes v2
1 ; [MIRROR VIEW] Draw sky v2
0 ; [MIRROR VIEW] Draw heat haze v2
0 ; [MIRROR VIEW] Draw lens flare (0 => off, 1 => 'real' camera views only, 2 => all views but cockpit, 3 => always) v2
0 ; [MIRROR VIEW] Draw Bushes v2
0 ; [MIRROR VIEW] Draw trackside cameras v2
0 ; [MIRROR VIEW] Draw trackside cranes v2
0 ; [MIRROR VIEW] Draw distant buildings v2
0 ; [MIRROR VIEW] Draw near buildings v2
1 ; [MIRROR VIEW] Draw horizon strips v2
0 ; [MIRROR VIEW] Draw trackside photographers v2
1 ; [MIRROR VIEW] Draw track (0 => off, 1 => basic, 2 => with detail maps) v2
0 ; [MIRROR VIEW] Draw trackside platforms v2
0 ; [MIRROR VIEW] Draw videowalls v2
0 ; [MIRROR VIEW] Draw Misc. trackside objects v2
1 ; [MIRROR VIEW] Draw trackside fences v2
1 ; [MIRROR VIEW] Draw trackside walls v2
1 ; [MIRROR VIEW] Draw track kerbing v2
1 ; [MIRROR VIEW] Draw bridges v2
0 ; [MIRROR VIEW] Draw Near stands v2
0 ; [MIRROR VIEW] Draw Far stands v2
1 ; [MIRROR VIEW] Draw Near land v2
0 ; [MIRROR VIEW] Draw Far land v2
1 ; [MIRROR VIEW] Draw track marshalls v2
1 ; [MIRROR VIEW] Draw large trackside signs v2
1 ; [MIRROR VIEW] Draw small trackside signs v2
0 ; [MIRROR VIEW] Draw Near trees v2
0 ; [MIRROR VIEW] Draw Far trees v2
0 ; [MIRROR VIEW] Draw video-wall screens v2
0 ; [MIRROR VIEW] Draw shadows on track v2
0 ; [MIRROR VIEW] Draw Required trackside buildings
25 ; [MIRROR VIEW] Car lod : load balance as % of notional max possible number of car polys (at highest LOD) v9
62 ; [MIRROR VIEW] Car lod : maximum LOD (scalar 100=>1) v2
400 ; [MIRROR VIEW] Car lod : distance at which to cull cars in view (metres) v2
62 ; [MIRROR VIEW] Car lod : scalar
0 ; [MIRROR VIEW] If using advanced car shader, then we can also (optionally) use improved wheel lighting
2 ; [VIDEOWALL VIEW] Texture filter quality (0 => none, 1 => point, 2 => bilinear, 3 => anisotropic, 4 => flatcubic, 5 => gaussiancubic) v3
0 ; [VIDEOWALL VIEW] Texture filter quality for mipmaps - if any - (0 => none, 1 => point, 2 => bilinear, 3 => anisotropic, 4 => flatcubic/quincunx, 5 => gaussiancubic) v3
1 ; [VIDEOWALL VIEW] Max anisotropic filtering (1 => off, to max 7) v2
115 ; [VIDEOWALL VIEW] Mipmap bias (0 => -8 to 200 => +8) -ve=> sharper v2
1037 ; [VIDEOWALL VIEW] Distance cull ALL track objects past this distance (overides LOD, 0 => off)
5 ; [VIDEOWALL VIEW] Fade out (cull) track objects band depth as % of cull distance (0 => immediate at cull point)
171 ; [VIDEOWALL VIEW] Scale track LOD distance - make larger to force lower LOD earlier
81 ; [VIDEOWALL VIEW] Constant min distance in metres for track LOD calcs - make larger to force lower max LOD - else 0 for full LOD range
100 ; [VIDEOWALL VIEW] Threshold distance in metres to switch in low LOD track
1 ; [VIDEOWALL VIEW] Display track shadows
1 ; [VIDEOWALL VIEW] Shadow type (under cars) (0=> off, 1=> static, 2=> composite, 3=> projected)
0 ; [VIDEOWALL VIEW] Blur shadows (projected shadows only)(should be 0 (no blur),2,4,6,9,12, or 16)
2 ; [VIDEOWALL VIEW] Max number of shadow maps that are allowed in view UNDER CAR
2 ; [VIDEOWALL VIEW] Max number of shadow maps that are allowed in view OVER CAR
0 ; [VIDEOWALL VIEW] Enable wet weather reflections
50 ; [VIDEOWALL VIEW] Reflect static objects within this distance (0 => off)
0 ; [VIDEOWALL VIEW] Reflect cars in wet track
0 ; [VIDEOWALL VIEW] Reflect car particles (broken subassemly) in wet track v2
0 ; [VIDEOWALL VIEW] Enable static environment reflections (0=>off 1=>on) v3
0 ; [VIDEOWALL VIEW] Enable dynamic environment reflections to X metres (for advanced carshader only) v3
0 ; [VIDEOWALL VIEW] Max number of dynamic envmaps to use (1 to 22(!), 0=>off - for advanced carshader only) v3
1 ; [VIDEOWALL VIEW] Draw Particles
0 ; [VIDEOWALL VIEW] Draw rain (0 => off, 1 => on)
0 ; [VIDEOWALL VIEW] DrawBrakeGlows (0 => off, 1 => on)
0 ; [VIDEOWALL VIEW] DrawExternalSteering (0 => off, 1 => on)
0 ; [VIDEOWALL VIEW] Draw crowds (0 => off, 1 => on, 2 => on and animating) v2
1 ; [VIDEOWALL VIEW] Draw X objects in pit lane (0 => off, else max number of 'teams' to draw) v2
1 ; [VIDEOWALL VIEW] Draw crowd camera flashes v2
1 ; [VIDEOWALL VIEW] Draw sky v2
0 ; [VIDEOWALL VIEW] Draw heat haze v2
0 ; [VIDEOWALL VIEW] Draw lens flare (0 => off, 1 => 'real' camera views only, 2 => all views but cockpit, 3 => always) v2
1 ; [VIDEOWALL VIEW] Draw Bushes v2
1 ; [VIDEOWALL VIEW] Draw trackside cameras v2
1 ; [VIDEOWALL VIEW] Draw trackside cranes v2
1 ; [VIDEOWALL VIEW] Draw distant buildings v2
1 ; [VIDEOWALL VIEW] Draw near buildings v2
1 ; [VIDEOWALL VIEW] Draw horizon strips v2
1 ; [VIDEOWALL VIEW] Draw trackside photographers v2
1 ; [VIDEOWALL VIEW] Draw track (0 => off, 1 => basic, 2 => with detail maps) v2
1 ; [VIDEOWALL VIEW] Draw trackside platforms v2
1 ; [VIDEOWALL VIEW] Draw videowalls v2
1 ; [VIDEOWALL VIEW] Draw Misc. trackside objects v2
1 ; [VIDEOWALL VIEW] Draw trackside fences v2
1 ; [VIDEOWALL VIEW] Draw trackside walls v2
1 ; [VIDEOWALL VIEW] Draw track kerbing v2
1 ; [VIDEOWALL VIEW] Draw bridges v2
1 ; [VIDEOWALL VIEW] Draw Near stands v2
1 ; [VIDEOWALL VIEW] Draw Far stands v2
1 ; [VIDEOWALL VIEW] Draw Near land v2
1 ; [VIDEOWALL VIEW] Draw Far land v2
1 ; [VIDEOWALL VIEW] Draw track marshalls v2
1 ; [VIDEOWALL VIEW] Draw large trackside signs v2
1 ; [VIDEOWALL VIEW] Draw small trackside signs v2
1 ; [VIDEOWALL VIEW] Draw Near trees v2
1 ; [VIDEOWALL VIEW] Draw Far trees v2
1 ; [VIDEOWALL VIEW] Draw video-wall screens v2
1 ; [VIDEOWALL VIEW] Draw shadows on track v2
1 ; [VIDEOWALL VIEW] Draw Required trackside buildings
31 ; [VIDEOWALL VIEW] Car lod : load balance as % of notional max possible number of car polys (at highest LOD) v10
67 ; [VIDEOWALL VIEW] Car lod : maximum LOD (scalar 100=>1) v3
479 ; [VIDEOWALL VIEW] Car lod : distance at which to cull cars in view (metres) v5
67 ; [VIDEOWALL VIEW] Car lod : scalar v2
0 ; [VIDEOWALL VIEW] If using advanced car shader, then we can also (optionally) use improved wheel lighting



[End of file]


My system specs are, AMD Duron 2600+, 512 MB DDR400 memory, 128MB Gigabyte Radeon 9600 Pro.
Reply Quote
Re: my f1graphics.cfg for ATI Radeon 9600 Pro
Date: June 27, 2005 12:32AM
Posted by: CorruptCop
I apologise for not being to specific on the specs... I also have Windows XP installed.

Grand Prix 4 is set to 1024x768 resolution and no compromise is made on details, all is set high. Even when viewing the entire grid of cars coming down the straight from an external track cam, the frame rate stays reasonably high. I do not have any apps installed to measure framerate, but the PO stays well below 100%. Seeing as this is a constant issue for everyone, i'm sharing my settings in hope it will also benefit others.
Reply Quote
Re: my f1graphics.cfg for ATI Radeon 9600 Pro
Date: June 27, 2005 01:04AM
Posted by: bones1834
Do me a favor and backup your f1graphics.cfg and try this one. Let me know if the results are better. Thanks

1 ; f1graphics.cfg controls all settings (default 0)
1280 ; [RELEASE] Game 3D Horizontal Resolution
1024 ; [RELEASE] Game 3D Vertical Resolution
1 ; [RELEASE] Enable 32bit mode if available NB. If Windowed then is forced to desktop format
1 ; [RELEASE] Enable hardware T&L if available
0 ; [RELEASE] Run in a window
16 ; [RELEASE] Number of multisamples if available (0-16 :: 0 => off, 1 unused)
0 ; [RELEASE] Force use of reference rasterizer
0 ; [RELEASE] Vsync (0=>off, or every nth frame) v2
73 ; [RELEASE] AutoPerformance (Automatic Performance Setting)
0 ; [RELEASE] TestedPerformanceLow (Tested Performance Setting)
0 ; [RELEASE] TestedPerformanceHigh (Tested Performance Setting)
1280 ; [DEBUG] Game 3D Horizontal Resolution
1024 ; [DEBUG] Game 3D Vertical Resolution
1 ; [DEBUG] Enable 32bit mode if available NB. If Windowed then is forced to desktop format
1 ; [DEBUG] Enable hardware T&L if available
1 ; [DEBUG] Run in a window
0 ; [DEBUG] Number of multisamples if available (0-16 :: 0 => off, 1 unused)
0 ; [DEBUG] Force use of reference rasterizer
0 ; [DEBUG] Vsync (0=>off, or every nth frame) v2
153 ; [DEBUG] AutoPerformance (Automatic Performance Setting)
0 ; [DEBUG] TestedPerformanceLow (Tested Performance Setting)
0 ; [DEBUG] TestedPerformanceHigh (Tested Performance Setting)
0 ; Texture quality : 0 => max 2 => half 4 => qtr 8 => eigth
1 ; Increase car texture quality (1 on, 0 off)
0 ; Low track geometry (1 on, 0 off)
0 ; Crude quadtree cull only (0=> off, 1=>always, 2=>only for TNL); recommended for fast gfx, low cpu
2 ; Number of mipmaps (0 => off) v2
1 ; Use compressed textures if supported
0 ; Full 32bit textures
7 ; Set 0 => no 8bit alpha (all stencil - yuck) 8 => all 8bit alpha (no stencil - nice) else 1-7 as cut off
1 ; If using compressed then ramp 1bit DXT1 to nbit DXT5 to avoid edge bleed v2
1 ; Render targets must match the main formats v2
1 ; Enable Fogging
1 ; Enable AdvancedCarShader v2
1 ; Pre-light track (Update track lighting using CPU)
0 ; Low res geometry track (1 low res, 0 normal)
1 ; Rotate wheels via textures v2
0 ; Bump map track (requires DP3; 0 => off)
4 ; Load balance : Frames over which to sample occupancy
110 ; Load balance : Start load decrease if occupancy over this
90 ; Load balance : Start load increase if occupancy under this v2
75 ; Load balance : Speed of load decrease ( < slower > faster)
33 ; Load balance : Speed of load increase ( < slower > faster)
1 ; Enable mirrors
2 ; Angle left mirror 0(in)-16(parallel)-32(out) v2
2 ; Angle right mirror 0(in)-16(parallel)-32(out) v2
16 ; Magnify mirror (16 => normal <16 wide >16 zoom)
133 ; Show own car (0 never, bit 1 trans, bit 2 solid, bit 3 context only bit7-fullpolycar in tcam) v3
1 ; Overide show own car if mirrors set low
0 ; Cockpit zoom (0 to 100) v2
1 ; Enable external view mirrors (0 0ff, 1 onboard, 2 all external views) v2
0 ; Enable track map (0 off, 1 arcade views only, 2 all non trackside)
9 ; Num overdraws for blur effects (eg reflections) Should be one of {2,4,6,9,12,16}
2 ; Reflect effect (0 => none-very sharp reflections), 1 => mipmapfilter, 2 => overdraw(best), 3 => hardwareboxfilter, 4 => swmungefilter(2nd best-best for 16bit), 5 => jitter(GP3 stylee) v3
512 ; If Jitter, how many ?
60 ; For normal reflections scale LOD (0 to 100%) v3
20 ; For blured effect reflections scale LOD (0 to 100%) v3
1 ; Maximum allowed heat hazes in a single view v2
0 ; Haze size in pixels : 0 => auto as proportion of main resolution (recommended)
1 ; Enable rain droplets on lens/visor
1 ; Enable visor when in cockpit view
1 ; Enable sky messages
1 ; Enable true type fonts
0 ; Environment map strength (0=>use game default)
0 ; Full dynamic video walls v2
30 ; Velocity m/s at which dynamic video walls are disabled (0 => no cutoff)
0 ; Size of video wall textures (dynamic) 0=>auto scale to game resolution
200000 ; Number of particle time slices per second.
0 ; TV style overlays on track cameras.
24 ; Multiplayer overlays 1:on 2:+cockpit 3:+allviews 4:+text 5:+gfx 6:+allcars
4 ; Multiplayer overlays - show for N closest
1 ; Enable user-defined gamma ramp v2
100 ; Gamma ramp for Reds (min value) range signed : 0-200 => -1 to 1 v4
200 ; Gamma ramp for Reds (max value) range signed : 0-200 => -1 to 1 v4
200 ; Gamma ramp for Reds (pow value) range signed : 0-200 => -1 to 1 v4
100 ; Gamma ramp for Greens (min value) range signed : 0-200 => -1 to 1 v4
200 ; Gamma ramp for Greens (max value) range signed : 0-200 => -1 to 1 v4
200 ; Gamma ramp for Greens (pow value) range signed : 0-200 => -1 to 1 v4
100 ; Gamma ramp for Blues (min value) range signed : 0-200 => -1 to 1 v4
200 ; Gamma ramp for Blues (max value) range signed : 0-200 => -1 to 1 v4
200 ; Gamma ramp for Blues (pow value) range signed : 0-200 => -1 to 1 v4
3 ; Enable cockpit gamma 0 off,1 player for all, 2 player for player only, 3 driver specific. Bit 7 (only when visor on) v2
100 ; Cockpit Gamma ramp for Reds (min value) range signed : 0-200 => -1 to 1 v3
190 ; Cockpit Gamma ramp for Reds (max value) range signed : 0-200 => -1 to 1 v3
190 ; Cockpit Gamma ramp for Reds (pow value) range signed : 0-200 => -1 to 1 v3
100 ; Cockpit Gamma ramp for Greens (min value) range signed : 0-200 => -1 to 1 v3
190 ; Cockpit Gamma ramp for Greens (max value) range signed : 0-200 => -1 to 1 v3
190 ; Cockpit Gamma ramp for Greens (pow value) range signed : 0-200 => -1 to 1 v3
100 ; Cockpit Gamma ramp for Blues (min value) range signed : 0-200 => -1 to 1 v3
190 ; Cockpit Gamma ramp for Blues (max value) range signed : 0-200 => -1 to 1 v3
190 ; Cockpit Gamma ramp for Blues (pow value) range signed : 0-200 => -1 to 1 v3
64 ; Size in texels for shadows over each car v2
256 ; Size in texels for projected shadows under each car
256 ; Size in texels for blurred projected shadows under each car
0 ; Attempt to page the over shadows
0 ; Attempt to page the under shadows
1 ; Animation rendering mode. (0 - cheap lighting, 1 - proper lighting, 2 - VS) v2
3 ; [MAIN VIEW] Texture filter quality (0 => none, 1 => point, 2 => bilinear, 3 => anisotropic, 4 => flatcubic, 5 => gaussiancubic) v3
1 ; [MAIN VIEW] Texture filter quality for mipmaps - if any - (0 => none, 1 => point, 2 => bilinear, 3 => anisotropic, 4 => flatcubic/quincunx, 5 => gaussiancubic) v3
7 ; [MAIN VIEW] Max anisotropic filtering (1 => off, to max 7) v2
60 ; [MAIN VIEW] Mipmap bias (0 => -8 to 200 => +8) -ve=> sharper v2
2500 ; [MAIN VIEW] Distance cull ALL track objects past this distance (overides LOD, 0 => off) v2
5 ; [MAIN VIEW] Fade out (cull) track objects band depth as % of cull distance (0 => immediate at cull point)
100 ; [MAIN VIEW] Scale track LOD distance - make larger to force lower LOD earlier
0 ; [MAIN VIEW] Constant min distance in metres for track LOD calcs - make larger to force lower max LOD - else 0 for full LOD range
300 ; [MAIN VIEW] Threshold distance in metres to switch in low LOD track
1 ; [MAIN VIEW] Display track shadows
3 ; [MAIN VIEW] Shadow type (under cars) (0=> off, 1=> static, 2=> composite, 3=> projected)
9 ; [MAIN VIEW] Blur shadows (projected shadows only)(should be 0 (no blur),2,4,6,9,12, or 16)
4 ; [MAIN VIEW] Max number of shadow maps that are allowed in view UNDER CAR
4 ; [MAIN VIEW] Max number of shadow maps that are allowed in view OVER CAR
1 ; [MAIN VIEW] Enable wet weather reflections (if main view is disabled, then all views are disabled)
400 ; [MAIN VIEW] Reflect static objects within this distance (0 => off) v3
1 ; [MAIN VIEW] Reflect cars in wet track
1 ; [MAIN VIEW] Reflect car particles (broken subassemly) in wet track v3
1 ; [MAIN VIEW] Enable static environment reflections (0=>off 1=>on) v3
200 ; [MAIN VIEW] Enable dynamic environment reflections to X metres (for advanced carshader only) v3
0 ; [MAIN VIEW] Max number of dynamic envmaps to use (1 to 22(!), 0=>off - for advanced carshader only) v3
1 ; [MAIN VIEW] Draw Particles
1 ; [MAIN VIEW] Draw rain (0 => off, 1 => on)
1 ; [MAIN VIEW] DrawBrakeGlows (0 => off, 1 => on)
1 ; [MAIN VIEW] DrawExternalSteering (0 => off, 1 => on)
1 ; [MAIN VIEW] Draw crowds (0 => off, 1 => on, 2 => on and animating)
11 ; [MAIN VIEW] Draw X objects in pit lane (0 => off, else max number of 'teams' to draw)
1 ; [MAIN VIEW] Draw crowd camera flashes
1 ; [MAIN VIEW] Draw sky
0 ; [MAIN VIEW] Draw heat haze v3
3 ; [MAIN VIEW] Draw lens flare (0 => off, 1 => 'real' camera views only, 2 => all views but cockpit, 3 => always)
1 ; [MAIN VIEW] Draw Bushes
1 ; [MAIN VIEW] Draw trackside cameras
1 ; [MAIN VIEW] Draw trackside cranes
1 ; [MAIN VIEW] Draw distant buildings
1 ; [MAIN VIEW] Draw near buildings
1 ; [MAIN VIEW] Draw horizon strips
1 ; [MAIN VIEW] Draw trackside photographers
1 ; [MAIN VIEW] Draw track (0 => off, 1 => basic, 2 => with detail maps)
1 ; [MAIN VIEW] Draw trackside platforms
1 ; [MAIN VIEW] Draw videowalls
1 ; [MAIN VIEW] Draw Misc. trackside objects
1 ; [MAIN VIEW] Draw trackside fences
1 ; [MAIN VIEW] Draw trackside walls
1 ; [MAIN VIEW] Draw track kerbing
1 ; [MAIN VIEW] Draw bridges
1 ; [MAIN VIEW] Draw Near stands
1 ; [MAIN VIEW] Draw Far stands
1 ; [MAIN VIEW] Draw Near land
1 ; [MAIN VIEW] Draw Far land
1 ; [MAIN VIEW] Draw track marshalls
1 ; [MAIN VIEW] Draw large trackside signs
1 ; [MAIN VIEW] Draw small trackside signs
1 ; [MAIN VIEW] Draw Near trees
1 ; [MAIN VIEW] Draw Far trees
1 ; [MAIN VIEW] Draw video-wall screens
1 ; [MAIN VIEW] Draw shadows on track v2
1 ; [MAIN VIEW] Draw Required trackside buildings
100 ; [MAIN VIEW] Car lod : load balance as % of notional max possible number of car polys (at highest LOD) v9
100 ; [MAIN VIEW] Car lod : maximum LOD (scalar 100=>1) v2
1000 ; [MAIN VIEW] Car lod : distance at which to cull cars in view (metres) v3
100 ; [MAIN VIEW] Car lod : scalar
1 ; [MAIN VIEW] If using advanced car shader, then we can also (optionally) use improved wheel lighting
2 ; [MIRROR VIEW] Texture filter quality (0 => none, 1 => point, 2 => bilinear, 3 => anisotropic, 4 => flatcubic, 5 => gaussiancubic) v3
1 ; [MIRROR VIEW] Texture filter quality for mipmaps - if any - (0 => none, 1 => point, 2 => bilinear, 3 => anisotropic, 4 => flatcubic/quincunx, 5 => gaussiancubic) v3
1 ; [MIRROR VIEW] Max anisotropic filtering (1 => off, to max 7) v2
115 ; [MIRROR VIEW] Mipmap bias (0 => -8 to 200 => +8) -ve=> sharper v2
812 ; [MIRROR VIEW] Distance cull ALL track objects past this distance (overides LOD, 0 => off)
5 ; [MIRROR VIEW] Fade out (cull) track objects band depth as % of cull distance (0 => immediate at cull point)
183 ; [MIRROR VIEW] Scale track LOD distance - make larger to force lower LOD earlier
93 ; [MIRROR VIEW] Constant min distance in metres for track LOD calcs - make larger to force lower max LOD - else 0 for full LOD range
50 ; [MIRROR VIEW] Threshold distance in metres to switch in low LOD track
0 ; [MIRROR VIEW] Display track shadows
1 ; [MIRROR VIEW] Shadow type (under cars) (0=> off, 1=> static, 2=> composite, 3=> projected)
0 ; [MIRROR VIEW] Blur shadows (projected shadows only)(should be 0 (no blur),2,4,6,9,12, or 16)
2 ; [MIRROR VIEW] Max number of shadow maps that are allowed in view UNDER CAR
2 ; [MIRROR VIEW] Max number of shadow maps that are allowed in view OVER CAR
0 ; [MIRROR VIEW] Enable wet weather reflections
50 ; [MIRROR VIEW] Reflect static objects within this distance (0 => off)
0 ; [MIRROR VIEW] Reflect cars in wet track
0 ; [MIRROR VIEW] Reflect car particles (broken subassemly) in wet track v2
0 ; [MIRROR VIEW] Enable static environment reflections (0=>off 1=>on) v3
0 ; [MIRROR VIEW] Enable dynamic environment reflections to X metres (for advanced carshader only) v3
0 ; [MIRROR VIEW] Max number of dynamic envmaps to use (1 to 22(!), 0=>off - for advanced carshader only) v3
1 ; [MIRROR VIEW] Draw Particles
1 ; [MIRROR VIEW] Draw rain (0 => off, 1 => on)
0 ; [MIRROR VIEW] DrawBrakeGlows (0 => off, 1 => on)
0 ; [MIRROR VIEW] DrawExternalSteering (0 => off, 1 => on)
1 ; [MIRROR VIEW] Draw crowds (0 => off, 1 => on, 2 => on and animating) v2
1 ; [MIRROR VIEW] Draw X objects in pit lane (0 => off, else max number of 'teams' to draw) v2
1 ; [MIRROR VIEW] Draw crowd camera flashes v2
1 ; [MIRROR VIEW] Draw sky v2
0 ; [MIRROR VIEW] Draw heat haze v2
0 ; [MIRROR VIEW] Draw lens flare (0 => off, 1 => 'real' camera views only, 2 => all views but cockpit, 3 => always) v2
1 ; [MIRROR VIEW] Draw Bushes v2
1 ; [MIRROR VIEW] Draw trackside cameras v2
1 ; [MIRROR VIEW] Draw trackside cranes v2
1 ; [MIRROR VIEW] Draw distant buildings v2
1 ; [MIRROR VIEW] Draw near buildings v2
1 ; [MIRROR VIEW] Draw horizon strips v2
1 ; [MIRROR VIEW] Draw trackside photographers v2
1 ; [MIRROR VIEW] Draw track (0 => off, 1 => basic, 2 => with detail maps) v2
1 ; [MIRROR VIEW] Draw trackside platforms v2
1 ; [MIRROR VIEW] Draw videowalls v2
1 ; [MIRROR VIEW] Draw Misc. trackside objects v2
1 ; [MIRROR VIEW] Draw trackside fences v2
1 ; [MIRROR VIEW] Draw trackside walls v2
1 ; [MIRROR VIEW] Draw track kerbing v2
1 ; [MIRROR VIEW] Draw bridges v2
1 ; [MIRROR VIEW] Draw Near stands v2
1 ; [MIRROR VIEW] Draw Far stands v2
1 ; [MIRROR VIEW] Draw Near land v2
1 ; [MIRROR VIEW] Draw Far land v2
1 ; [MIRROR VIEW] Draw track marshalls v2
1 ; [MIRROR VIEW] Draw large trackside signs v2
1 ; [MIRROR VIEW] Draw small trackside signs v2
1 ; [MIRROR VIEW] Draw Near trees v2
1 ; [MIRROR VIEW] Draw Far trees v2
1 ; [MIRROR VIEW] Draw video-wall screens v2
1 ; [MIRROR VIEW] Draw shadows on track v2
1 ; [MIRROR VIEW] Draw Required trackside buildings
70 ; [MIRROR VIEW] Car lod : load balance as % of notional max possible number of car polys (at highest LOD) v9
62 ; [MIRROR VIEW] Car lod : maximum LOD (scalar 100=>1) v2
400 ; [MIRROR VIEW] Car lod : distance at which to cull cars in view (metres) v2
62 ; [MIRROR VIEW] Car lod : scalar
0 ; [MIRROR VIEW] If using advanced car shader, then we can also (optionally) use improved wheel lighting
2 ; [VIDEOWALL VIEW] Texture filter quality (0 => none, 1 => point, 2 => bilinear, 3 => anisotropic, 4 => flatcubic, 5 => gaussiancubic) v3
1 ; [VIDEOWALL VIEW] Texture filter quality for mipmaps - if any - (0 => none, 1 => point, 2 => bilinear, 3 => anisotropic, 4 => flatcubic/quincunx, 5 => gaussiancubic) v3
1 ; [VIDEOWALL VIEW] Max anisotropic filtering (1 => off, to max 7) v2
115 ; [VIDEOWALL VIEW] Mipmap bias (0 => -8 to 200 => +8) -ve=> sharper v2
1037 ; [VIDEOWALL VIEW] Distance cull ALL track objects past this distance (overides LOD, 0 => off)
5 ; [VIDEOWALL VIEW] Fade out (cull) track objects band depth as % of cull distance (0 => immediate at cull point)
171 ; [VIDEOWALL VIEW] Scale track LOD distance - make larger to force lower LOD earlier
81 ; [VIDEOWALL VIEW] Constant min distance in metres for track LOD calcs - make larger to force lower max LOD - else 0 for full LOD range
100 ; [VIDEOWALL VIEW] Threshold distance in metres to switch in low LOD track
1 ; [VIDEOWALL VIEW] Display track shadows
1 ; [VIDEOWALL VIEW] Shadow type (under cars) (0=> off, 1=> static, 2=> composite, 3=> projected)
0 ; [VIDEOWALL VIEW] Blur shadows (projected shadows only)(should be 0 (no blur),2,4,6,9,12, or 16)
2 ; [VIDEOWALL VIEW] Max number of shadow maps that are allowed in view UNDER CAR
2 ; [VIDEOWALL VIEW] Max number of shadow maps that are allowed in view OVER CAR
0 ; [VIDEOWALL VIEW] Enable wet weather reflections
50 ; [VIDEOWALL VIEW] Reflect static objects within this distance (0 => off)
0 ; [VIDEOWALL VIEW] Reflect cars in wet track
0 ; [VIDEOWALL VIEW] Reflect car particles (broken subassemly) in wet track v2
0 ; [VIDEOWALL VIEW] Enable static environment reflections (0=>off 1=>on) v3
0 ; [VIDEOWALL VIEW] Enable dynamic environment reflections to X metres (for advanced carshader only) v3
0 ; [VIDEOWALL VIEW] Max number of dynamic envmaps to use (1 to 22(!), 0=>off - for advanced carshader only) v3
1 ; [VIDEOWALL VIEW] Draw Particles
0 ; [VIDEOWALL VIEW] Draw rain (0 => off, 1 => on)
0 ; [VIDEOWALL VIEW] DrawBrakeGlows (0 => off, 1 => on)
0 ; [VIDEOWALL VIEW] DrawExternalSteering (0 => off, 1 => on)
0 ; [VIDEOWALL VIEW] Draw crowds (0 => off, 1 => on, 2 => on and animating) v2
1 ; [VIDEOWALL VIEW] Draw X objects in pit lane (0 => off, else max number of 'teams' to draw) v2
1 ; [VIDEOWALL VIEW] Draw crowd camera flashes v2
1 ; [VIDEOWALL VIEW] Draw sky v2
0 ; [VIDEOWALL VIEW] Draw heat haze v2
0 ; [VIDEOWALL VIEW] Draw lens flare (0 => off, 1 => 'real' camera views only, 2 => all views but cockpit, 3 => always) v2
1 ; [VIDEOWALL VIEW] Draw Bushes v2
1 ; [VIDEOWALL VIEW] Draw trackside cameras v2
1 ; [VIDEOWALL VIEW] Draw trackside cranes v2
1 ; [VIDEOWALL VIEW] Draw distant buildings v2
1 ; [VIDEOWALL VIEW] Draw near buildings v2
1 ; [VIDEOWALL VIEW] Draw horizon strips v2
1 ; [VIDEOWALL VIEW] Draw trackside photographers v2
1 ; [VIDEOWALL VIEW] Draw track (0 => off, 1 => basic, 2 => with detail maps) v2
1 ; [VIDEOWALL VIEW] Draw trackside platforms v2
1 ; [VIDEOWALL VIEW] Draw videowalls v2
1 ; [VIDEOWALL VIEW] Draw Misc. trackside objects v2
1 ; [VIDEOWALL VIEW] Draw trackside fences v2
1 ; [VIDEOWALL VIEW] Draw trackside walls v2
1 ; [VIDEOWALL VIEW] Draw track kerbing v2
1 ; [VIDEOWALL VIEW] Draw bridges v2
1 ; [VIDEOWALL VIEW] Draw Near stands v2
1 ; [VIDEOWALL VIEW] Draw Far stands v2
1 ; [VIDEOWALL VIEW] Draw Near land v2
1 ; [VIDEOWALL VIEW] Draw Far land v2
1 ; [VIDEOWALL VIEW] Draw track marshalls v2
1 ; [VIDEOWALL VIEW] Draw large trackside signs v2
1 ; [VIDEOWALL VIEW] Draw small trackside signs v2
1 ; [VIDEOWALL VIEW] Draw Near trees v2
1 ; [VIDEOWALL VIEW] Draw Far trees v2
1 ; [VIDEOWALL VIEW] Draw video-wall screens v2
1 ; [VIDEOWALL VIEW] Draw shadows on track v2
1 ; [VIDEOWALL VIEW] Draw Required trackside buildings
31 ; [VIDEOWALL VIEW] Car lod : load balance as % of notional max possible number of car polys (at highest LOD) v10
67 ; [VIDEOWALL VIEW] Car lod : maximum LOD (scalar 100=>1) v3
479 ; [VIDEOWALL VIEW] Car lod : distance at which to cull cars in view (metres) v5
67 ; [VIDEOWALL VIEW] Car lod : scalar v2
0 ; [VIDEOWALL VIEW] If using advanced car shader, then we can also (optionally) use improved wheel lighting
Reply Quote
Re: my f1graphics.cfg for ATI Radeon 9600 Pro
Date: June 27, 2005 10:31AM
Posted by: Daniel Knott
I have that graphics card, I will post later and try them out - btw mine is a 256MB version? What is yours?

I can also post my cfg if you would like?

H E L L O
Reply Quote
Re: my f1graphics.cfg for ATI Radeon 9600 Pro
Date: June 27, 2005 10:52AM
Posted by: EddieB
Daniel Knott Wrote:
-------------------------------------------------------
> I have that graphics card, I will post later and
> try them out - btw mine is a 256MB version? What
> is yours?
>
> I can also post my cfg if you would like?
>

Me too! I've got it working a treat but am away from gp4 for another week, I'll post mine if anyone wants when I'm back to it - might be interesting to compare.




Reply Quote
Re: my f1graphics.cfg for ATI Radeon 9600 Pro
Date: June 27, 2005 06:04PM
Posted by: nismo
curruptcop,other users,

I also have a ATI Radeon 9600 pro and Win.XP .
Framerate is between 30-50 % and everything high\highest.
but what is your estimated average framerate 0 frames/second in your gamegraphics menu.? ( Or other ATI Radeon 9600 pro users)

Thanks in advance.
NISMO.



Edited 1 time(s). Last edit at 06/27/2005 06:28PM by nismo.
Reply Quote
Re: my f1graphics.cfg for ATI Radeon 9600 Pro
Date: June 27, 2005 08:20PM
Posted by: CorruptCop
Hi bones1834

I tried your config file and my game ended up with faded, heavy bilinear filtered cars. So much as that the naming on the cars could no longer be read because it was so blurred. This might be a driver issue on my side, but my config file produced sharp, clear graphics for me aswell as good performance.

bones1834, your config is faster than mine, but with the graphical issues.

I read somewhere that the 128 MB Radeon 9600 Pro is faster than the 256 MB version, thats why i opted for the 128MB card when i bought it sum time ago.

Thanks for the feedback!
Cheers!
Reply Quote
Re: my f1graphics.cfg for ATI Radeon 9600 Pro
Date: June 27, 2005 09:27PM
Posted by: BoReD
corrupt....small favor. Change the first line of your config from 0 to 1 and run the game again. See if you notice any difference.

BoReD
Reply Quote
Re: my f1graphics.cfg for ATI Radeon 9600 Pro
Date: June 28, 2005 04:03AM
Posted by: supra97rx7
yea, because its 0, doesnt that just mean that the graphical changes are only those done within the game's options/graphics section?
Reply Quote
Re: my f1graphics.cfg for ATI Radeon 9600 Pro
Date: June 28, 2005 04:15AM
Posted by: BoReD
@supra that is my understanding.
Reply Quote
Re: my f1graphics.cfg for ATI Radeon 9600 Pro
Date: June 28, 2005 11:23AM
Posted by: CorruptCop
Hi Bored, i changed that value to a 1, as to allow only f1graphics.cfg settings to be used. And the result is that the game still runs as good as usual. The game runs same, changing that value to a 0 or 1.

But thanks anyway!
Reply Quote
Re: my f1graphics.cfg for ATI Radeon 9600 Pro
Date: June 28, 2005 11:24AM
Posted by: Daniel Knott
here's mine, tell me what you think:

1 ; f1graphics.cfg controls all settings (default 0)
1024 ; [RELEASE] Game 3D Horizontal Resolution
768 ; [RELEASE] Game 3D Vertical Resolution
1 ; [RELEASE] Enable 32bit mode if available NB. If Windowed then is forced to desktop format
1 ; [RELEASE] Enable hardware T&L if available
0 ; [RELEASE] Run in a window
0 ; [RELEASE] Number of multisamples if available (0-16 :: 0 => off, 1 unused)
0 ; [RELEASE] Force use of reference rasterizer
0 ; [RELEASE] Vsync (0=>off, or every nth frame) v2
1545 ; [RELEASE] AutoPerformance (Automatic Performance Setting)
26 ; [RELEASE] TestedPerformanceLow (Tested Performance Setting)
30 ; [RELEASE] TestedPerformanceHigh (Tested Performance Setting)
800 ; [DEBUG] Game 3D Horizontal Resolution
600 ; [DEBUG] Game 3D Vertical Resolution
1 ; [DEBUG] Enable 32bit mode if available NB. If Windowed then is forced to desktop format
1 ; [DEBUG] Enable hardware T&L if available
1 ; [DEBUG] Run in a window
0 ; [DEBUG] Number of multisamples if available (0-16 :: 0 => off, 1 unused)
0 ; [DEBUG] Force use of reference rasterizer
0 ; [DEBUG] Vsync (0=>off, or every nth frame) v2
153 ; [DEBUG] AutoPerformance (Automatic Performance Setting)
0 ; [DEBUG] TestedPerformanceLow (Tested Performance Setting)
0 ; [DEBUG] TestedPerformanceHigh (Tested Performance Setting)
0 ; Texture quality : 0 => max 2 => half 4 => qtr 8 => eigth
1 ; Increase car texture quality (1 on, 0 off)
0 ; Low track geometry (1 on, 0 off)
0 ; Crude quadtree cull only (0=> off, 1=>always, 2=>only for TNL); recommended for fast gfx, low cpu
4 ; Number of mipmaps (0 => off) v2
1 ; Use compressed textures if supported
0 ; Full 32bit textures
7 ; Set 0 => no 8bit alpha (all stencil - yuck) 8 => all 8bit alpha (no stencil - nice) else 1-7 as cut off
1 ; If using compressed then ramp 1bit DXT1 to nbit DXT5 to avoid edge bleed v2
1 ; Render targets must match the main formats v2
1 ; Enable Fogging
1 ; Enable AdvancedCarShader v2
1 ; Pre-light track (Update track lighting using CPU)
0 ; Low res geometry track (1 low res, 0 normal)
1 ; Rotate wheels via textures v2
1 ; Bump map track (requires DP3; 0 => off)
4 ; Load balance : Frames over which to sample occupancy
110 ; Load balance : Start load decrease if occupancy over this
90 ; Load balance : Start load increase if occupancy under this v2
75 ; Load balance : Speed of load decrease ( < slower > faster)
33 ; Load balance : Speed of load increase ( < slower > faster)
1 ; Enable mirrors
2 ; Angle left mirror 0(in)-16(parallel)-32(out) v2
2 ; Angle right mirror 0(in)-16(parallel)-32(out) v2
16 ; Magnify mirror (16 => normal <16 wide >16 zoom)
133 ; Show own car (0 never, bit 1 trans, bit 2 solid, bit 3 context only bit7-fullpolycar in tcam) v3
1 ; Overide show own car if mirrors set low
10 ; Cockpit zoom (0 to 100) v2
1 ; Enable external view mirrors (0 0ff, 1 onboard, 2 all external views) v2
0 ; Enable track map (0 off, 1 arcade views only, 2 all non trackside)
9 ; Num overdraws for blur effects (eg reflections) Should be one of {2,4,6,9,12,16}
2 ; Reflect effect (0 => none-very sharp reflections), 1 => mipmapfilter, 2 => overdraw(best), 3 => hardwareboxfilter, 4 => swmungefilter(2nd best-best for 16bit), 5 => jitter(GP3 stylee) v3
512 ; If Jitter, how many ?
60 ; For normal reflections scale LOD (0 to 100%) v3
20 ; For blured effect reflections scale LOD (0 to 100%) v3
1 ; Maximum allowed heat hazes in a single view v2
0 ; Haze size in pixels : 0 => auto as proportion of main resolution (recommended)
1 ; Enable rain droplets on lens/visor
1 ; Enable visor when in cockpit view
0 ; Enable sky messages
1 ; Enable true type fonts
0 ; Environment map strength (0=>use game default)
1 ; Full dynamic video walls v2
30 ; Velocity m/s at which dynamic video walls are disabled (0 => no cutoff)
0 ; Size of video wall textures (dynamic) 0=>auto scale to game resolution
200000 ; Number of particle time slices per second.
0 ; TV style overlays on track cameras.
24 ; Multiplayer overlays 1:on 2:+cockpit 3:+allviews 4:+text 5:+gfx 6:+allcars
4 ; Multiplayer overlays - show for N closest
0 ; Enable user-defined gamma ramp v2
100 ; Gamma ramp for Reds (min value) range signed : 0-200 => -1 to 1 v4
200 ; Gamma ramp for Reds (max value) range signed : 0-200 => -1 to 1 v4
200 ; Gamma ramp for Reds (pow value) range signed : 0-200 => -1 to 1 v4
100 ; Gamma ramp for Greens (min value) range signed : 0-200 => -1 to 1 v4
200 ; Gamma ramp for Greens (max value) range signed : 0-200 => -1 to 1 v4
200 ; Gamma ramp for Greens (pow value) range signed : 0-200 => -1 to 1 v4
100 ; Gamma ramp for Blues (min value) range signed : 0-200 => -1 to 1 v4
200 ; Gamma ramp for Blues (max value) range signed : 0-200 => -1 to 1 v4
200 ; Gamma ramp for Blues (pow value) range signed : 0-200 => -1 to 1 v4
131 ; Enable cockpit gamma 0 off,1 player for all, 2 player for player only, 3 driver specific. Bit 7 (only when visor on) v2
100 ; Cockpit Gamma ramp for Reds (min value) range signed : 0-200 => -1 to 1 v3
190 ; Cockpit Gamma ramp for Reds (max value) range signed : 0-200 => -1 to 1 v3
190 ; Cockpit Gamma ramp for Reds (pow value) range signed : 0-200 => -1 to 1 v3
100 ; Cockpit Gamma ramp for Greens (min value) range signed : 0-200 => -1 to 1 v3
190 ; Cockpit Gamma ramp for Greens (max value) range signed : 0-200 => -1 to 1 v3
190 ; Cockpit Gamma ramp for Greens (pow value) range signed : 0-200 => -1 to 1 v3
100 ; Cockpit Gamma ramp for Blues (min value) range signed : 0-200 => -1 to 1 v3
190 ; Cockpit Gamma ramp for Blues (max value) range signed : 0-200 => -1 to 1 v3
190 ; Cockpit Gamma ramp for Blues (pow value) range signed : 0-200 => -1 to 1 v3
64 ; Size in texels for shadows over each car v2
256 ; Size in texels for projected shadows under each car
256 ; Size in texels for blurred projected shadows under each car
0 ; Attempt to page the over shadows
0 ; Attempt to page the under shadows
1 ; Animation rendering mode. (0 - cheap lighting, 1 - proper lighting, 2 - VS) v2
3 ; [MAIN VIEW] Texture filter quality (0 => none, 1 => point, 2 => bilinear, 3 => anisotropic, 4 => flatcubic, 5 => gaussiancubic) v3
3 ; [MAIN VIEW] Texture filter quality for mipmaps - if any - (0 => none, 1 => point, 2 => bilinear, 3 => anisotropic, 4 => flatcubic/quincunx, 5 => gaussiancubic) v3
7 ; [MAIN VIEW] Max anisotropic filtering (1 => off, to max 7) v2
200 ; [MAIN VIEW] Mipmap bias (0 => -8 to 200 => +8) -ve=> sharper v2
1450 ; [MAIN VIEW] Distance cull ALL track objects past this distance (overides LOD, 0 => off) v2
100 ; [MAIN VIEW] Fade out (cull) track objects band depth as % of cull distance (0 => immediate at cull point)
0 ; [MAIN VIEW] Scale track LOD distance - make larger to force lower LOD earlier
0 ; [MAIN VIEW] Constant min distance in metres for track LOD calcs - make larger to force lower max LOD - else 0 for full LOD range
100 ; [MAIN VIEW] Threshold distance in metres to switch in low LOD track
1 ; [MAIN VIEW] Display track shadows
3 ; [MAIN VIEW] Shadow type (under cars) (0=> off, 1=> static, 2=> composite, 3=> projected)
9 ; [MAIN VIEW] Blur shadows (projected shadows only)(should be 0 (no blur),2,4,6,9,12, or 16)
4 ; [MAIN VIEW] Max number of shadow maps that are allowed in view UNDER CAR
4 ; [MAIN VIEW] Max number of shadow maps that are allowed in view OVER CAR
1 ; [MAIN VIEW] Enable wet weather reflections (if main view is disabled, then all views are disabled)
150 ; [MAIN VIEW] Reflect static objects within this distance (0 => off) v3
1 ; [MAIN VIEW] Reflect cars in wet track
1 ; [MAIN VIEW] Reflect car particles (broken subassemly) in wet track v3
1 ; [MAIN VIEW] Enable static environment reflections (0=>off 1=>on) v3
80 ; [MAIN VIEW] Enable dynamic environment reflections to X metres (for advanced carshader only) v3
1 ; [MAIN VIEW] Max number of dynamic envmaps to use (1 to 22(!), 0=>off - for advanced carshader only) v3
1 ; [MAIN VIEW] Draw Particles
1 ; [MAIN VIEW] Draw rain (0 => off, 1 => on)
1 ; [MAIN VIEW] DrawBrakeGlows (0 => off, 1 => on)
1 ; [MAIN VIEW] DrawExternalSteering (0 => off, 1 => on)
2 ; [MAIN VIEW] Draw crowds (0 => off, 1 => on, 2 => on and animating)
0 ; [MAIN VIEW] Draw X objects in pit lane (0 => off, else max number of 'teams' to draw)
1 ; [MAIN VIEW] Draw crowd camera flashes
1 ; [MAIN VIEW] Draw sky
1 ; [MAIN VIEW] Draw heat haze v3
1 ; [MAIN VIEW] Draw lens flare (0 => off, 1 => 'real' camera views only, 2 => all views but cockpit, 3 => always)
1 ; [MAIN VIEW] Draw Bushes
1 ; [MAIN VIEW] Draw trackside cameras
1 ; [MAIN VIEW] Draw trackside cranes
1 ; [MAIN VIEW] Draw distant buildings
1 ; [MAIN VIEW] Draw near buildings
1 ; [MAIN VIEW] Draw horizon strips
1 ; [MAIN VIEW] Draw trackside photographers
2 ; [MAIN VIEW] Draw track (0 => off, 1 => basic, 2 => with detail maps)
1 ; [MAIN VIEW] Draw trackside platforms
1 ; [MAIN VIEW] Draw videowalls
1 ; [MAIN VIEW] Draw Misc. trackside objects
1 ; [MAIN VIEW] Draw trackside fences
1 ; [MAIN VIEW] Draw trackside walls
1 ; [MAIN VIEW] Draw track kerbing
1 ; [MAIN VIEW] Draw bridges
1 ; [MAIN VIEW] Draw Near stands
1 ; [MAIN VIEW] Draw Far stands
1 ; [MAIN VIEW] Draw Near land
1 ; [MAIN VIEW] Draw Far land
1 ; [MAIN VIEW] Draw track marshalls
1 ; [MAIN VIEW] Draw large trackside signs
1 ; [MAIN VIEW] Draw small trackside signs
1 ; [MAIN VIEW] Draw Near trees
1 ; [MAIN VIEW] Draw Far trees
1 ; [MAIN VIEW] Draw video-wall screens
1 ; [MAIN VIEW] Draw shadows on track v2
1 ; [MAIN VIEW] Draw Required trackside buildings
100 ; [MAIN VIEW] Car lod : load balance as % of notional max possible number of car polys (at highest LOD) v9
100 ; [MAIN VIEW] Car lod : maximum LOD (scalar 100=>1) v2
4000 ; [MAIN VIEW] Car lod : distance at which to cull cars in view (metres) v3
100 ; [MAIN VIEW] Car lod : scalar
1 ; [MAIN VIEW] If using advanced car shader, then we can also (optionally) use improved wheel lighting
0 ; [MIRROR VIEW] Texture filter quality (0 => none, 1 => point, 2 => bilinear, 3 => anisotropic, 4 => flatcubic, 5 => gaussiancubic) v3
0 ; [MIRROR VIEW] Texture filter quality for mipmaps - if any - (0 => none, 1 => point, 2 => bilinear, 3 => anisotropic, 4 => flatcubic/quincunx, 5 => gaussiancubic) v3
1 ; [MIRROR VIEW] Max anisotropic filtering (1 => off, to max 7) v2
135 ; [MIRROR VIEW] Mipmap bias (0 => -8 to 200 => +8) -ve=> sharper v2
70 ; [MIRROR VIEW] Distance cull ALL track objects past this distance (overides LOD, 0 => off)
5 ; [MIRROR VIEW] Fade out (cull) track objects band depth as % of cull distance (0 => immediate at cull point)
150 ; [MIRROR VIEW] Scale track LOD distance - make larger to force lower LOD earlier
70 ; [MIRROR VIEW] Constant min distance in metres for track LOD calcs - make larger to force lower max LOD - else 0 for full LOD range
20 ; [MIRROR VIEW] Threshold distance in metres to switch in low LOD track
0 ; [MIRROR VIEW] Display track shadows
0 ; [MIRROR VIEW] Shadow type (under cars) (0=> off, 1=> static, 2=> composite, 3=> projected)
0 ; [MIRROR VIEW] Blur shadows (projected shadows only)(should be 0 (no blur),2,4,6,9,12, or 16)
0 ; [MIRROR VIEW] Max number of shadow maps that are allowed in view UNDER CAR
0 ; [MIRROR VIEW] Max number of shadow maps that are allowed in view OVER CAR
0 ; [MIRROR VIEW] Enable wet weather reflections
0 ; [MIRROR VIEW] Reflect static objects within this distance (0 => off)
0 ; [MIRROR VIEW] Reflect cars in wet track
0 ; [MIRROR VIEW] Reflect car particles (broken subassemly) in wet track v2
0 ; [MIRROR VIEW] Enable static environment reflections (0=>off 1=>on) v3
0 ; [MIRROR VIEW] Enable dynamic environment reflections to X metres (for advanced carshader only) v3
0 ; [MIRROR VIEW] Max number of dynamic envmaps to use (1 to 22(!), 0=>off - for advanced carshader only) v3
1 ; [MIRROR VIEW] Draw Particles
0 ; [MIRROR VIEW] Draw rain (0 => off, 1 => on)
0 ; [MIRROR VIEW] DrawBrakeGlows (0 => off, 1 => on)
0 ; [MIRROR VIEW] DrawExternalSteering (0 => off, 1 => on)
0 ; [MIRROR VIEW] Draw crowds (0 => off, 1 => on, 2 => on and animating) v2
0 ; [MIRROR VIEW] Draw X objects in pit lane (0 => off, else max number of 'teams' to draw) v2
0 ; [MIRROR VIEW] Draw crowd camera flashes v2
1 ; [MIRROR VIEW] Draw sky v2
0 ; [MIRROR VIEW] Draw heat haze v2
0 ; [MIRROR VIEW] Draw lens flare (0 => off, 1 => 'real' camera views only, 2 => all views but cockpit, 3 => always) v2
1 ; [MIRROR VIEW] Draw Bushes v2
0 ; [MIRROR VIEW] Draw trackside cameras v2
1 ; [MIRROR VIEW] Draw trackside cranes v2
0 ; [MIRROR VIEW] Draw distant buildings v2
1 ; [MIRROR VIEW] Draw near buildings v2
1 ; [MIRROR VIEW] Draw horizon strips v2
0 ; [MIRROR VIEW] Draw trackside photographers v2
2 ; [MIRROR VIEW] Draw track (0 => off, 1 => basic, 2 => with detail maps) v2
1 ; [MIRROR VIEW] Draw trackside platforms v2
0 ; [MIRROR VIEW] Draw videowalls v2
1 ; [MIRROR VIEW] Draw Misc. trackside objects v2
1 ; [MIRROR VIEW] Draw trackside fences v2
1 ; [MIRROR VIEW] Draw trackside walls v2
1 ; [MIRROR VIEW] Draw track kerbing v2
1 ; [MIRROR VIEW] Draw bridges v2
1 ; [MIRROR VIEW] Draw Near stands v2
0 ; [MIRROR VIEW] Draw Far stands v2
1 ; [MIRROR VIEW] Draw Near land v2
0 ; [MIRROR VIEW] Draw Far land v2
1 ; [MIRROR VIEW] Draw track marshalls v2
1 ; [MIRROR VIEW] Draw large trackside signs v2
1 ; [MIRROR VIEW] Draw small trackside signs v2
1 ; [MIRROR VIEW] Draw Near trees v2
0 ; [MIRROR VIEW] Draw Far trees v2
0 ; [MIRROR VIEW] Draw video-wall screens v2
0 ; [MIRROR VIEW] Draw shadows on track v2
1 ; [MIRROR VIEW] Draw Required trackside buildings
25 ; [MIRROR VIEW] Car lod : load balance as % of notional max possible number of car polys (at highest LOD) v9
70 ; [MIRROR VIEW] Car lod : maximum LOD (scalar 100=>1) v2
150 ; [MIRROR VIEW] Car lod : distance at which to cull cars in view (metres) v2
75 ; [MIRROR VIEW] Car lod : scalar
0 ; [MIRROR VIEW] If using advanced car shader, then we can also (optionally) use improved wheel lighting
0 ; [VIDEOWALL VIEW] Texture filter quality (0 => none, 1 => point, 2 => bilinear, 3 => anisotropic, 4 => flatcubic, 5 => gaussiancubic) v3
0 ; [VIDEOWALL VIEW] Texture filter quality for mipmaps - if any - (0 => none, 1 => point, 2 => bilinear, 3 => anisotropic, 4 => flatcubic/quincunx, 5 => gaussiancubic) v3
1 ; [VIDEOWALL VIEW] Max anisotropic filtering (1 => off, to max 7) v2
60 ; [VIDEOWALL VIEW] Mipmap bias (0 => -8 to 200 => +8) -ve=> sharper v2
30 ; [VIDEOWALL VIEW] Distance cull ALL track objects past this distance (overides LOD, 0 => off)
2 ; [VIDEOWALL VIEW] Fade out (cull) track objects band depth as % of cull distance (0 => immediate at cull point)
150 ; [VIDEOWALL VIEW] Scale track LOD distance - make larger to force lower LOD earlier
100 ; [VIDEOWALL VIEW] Constant min distance in metres for track LOD calcs - make larger to force lower max LOD - else 0 for full LOD range
5 ; [VIDEOWALL VIEW] Threshold distance in metres to switch in low LOD track
0 ; [VIDEOWALL VIEW] Display track shadows
0 ; [VIDEOWALL VIEW] Shadow type (under cars) (0=> off, 1=> static, 2=> composite, 3=> projected)
0 ; [VIDEOWALL VIEW] Blur shadows (projected shadows only)(should be 0 (no blur),2,4,6,9,12, or 16)
0 ; [VIDEOWALL VIEW] Max number of shadow maps that are allowed in view UNDER CAR
0 ; [VIDEOWALL VIEW] Max number of shadow maps that are allowed in view OVER CAR
0 ; [VIDEOWALL VIEW] Enable wet weather reflections
0 ; [VIDEOWALL VIEW] Reflect static objects within this distance (0 => off)
0 ; [VIDEOWALL VIEW] Reflect cars in wet track
0 ; [VIDEOWALL VIEW] Reflect car particles (broken subassemly) in wet track v2
0 ; [VIDEOWALL VIEW] Enable static environment reflections (0=>off 1=>on) v3
0 ; [VIDEOWALL VIEW] Enable dynamic environment reflections to X metres (for advanced carshader only) v3
0 ; [VIDEOWALL VIEW] Max number of dynamic envmaps to use (1 to 22(!), 0=>off - for advanced carshader only) v3
1 ; [VIDEOWALL VIEW] Draw Particles
0 ; [VIDEOWALL VIEW] Draw rain (0 => off, 1 => on)
0 ; [VIDEOWALL VIEW] DrawBrakeGlows (0 => off, 1 => on)
0 ; [VIDEOWALL VIEW] DrawExternalSteering (0 => off, 1 => on)
0 ; [VIDEOWALL VIEW] Draw crowds (0 => off, 1 => on, 2 => on and animating) v2
0 ; [VIDEOWALL VIEW] Draw X objects in pit lane (0 => off, else max number of 'teams' to draw) v2
0 ; [VIDEOWALL VIEW] Draw crowd camera flashes v2
1 ; [VIDEOWALL VIEW] Draw sky v2
0 ; [VIDEOWALL VIEW] Draw heat haze v2
0 ; [VIDEOWALL VIEW] Draw lens flare (0 => off, 1 => 'real' camera views only, 2 => all views but cockpit, 3 => always) v2
1 ; [VIDEOWALL VIEW] Draw Bushes v2
0 ; [VIDEOWALL VIEW] Draw trackside cameras v2
1 ; [VIDEOWALL VIEW] Draw trackside cranes v2
0 ; [VIDEOWALL VIEW] Draw distant buildings v2
1 ; [VIDEOWALL VIEW] Draw near buildings v2
1 ; [VIDEOWALL VIEW] Draw horizon strips v2
0 ; [VIDEOWALL VIEW] Draw trackside photographers v2
2 ; [VIDEOWALL VIEW] Draw track (0 => off, 1 => basic, 2 => with detail maps) v2
1 ; [VIDEOWALL VIEW] Draw trackside platforms v2
1 ; [VIDEOWALL VIEW] Draw videowalls v2
1 ; [VIDEOWALL VIEW] Draw Misc. trackside objects v2
1 ; [VIDEOWALL VIEW] Draw trackside fences v2
1 ; [VIDEOWALL VIEW] Draw trackside walls v2
1 ; [VIDEOWALL VIEW] Draw track kerbing v2
1 ; [VIDEOWALL VIEW] Draw bridges v2
1 ; [VIDEOWALL VIEW] Draw Near stands v2
0 ; [VIDEOWALL VIEW] Draw Far stands v2
1 ; [VIDEOWALL VIEW] Draw Near land v2
0 ; [VIDEOWALL VIEW] Draw Far land v2
1 ; [VIDEOWALL VIEW] Draw track marshalls v2
1 ; [VIDEOWALL VIEW] Draw large trackside signs v2
1 ; [VIDEOWALL VIEW] Draw small trackside signs v2
1 ; [VIDEOWALL VIEW] Draw Near trees v2
0 ; [VIDEOWALL VIEW] Draw Far trees v2
0 ; [VIDEOWALL VIEW] Draw video-wall screens v2
0 ; [VIDEOWALL VIEW] Draw shadows on track v2
1 ; [VIDEOWALL VIEW] Draw Required trackside buildings
10 ; [VIDEOWALL VIEW] Car lod : load balance as % of notional max possible number of car polys (at highest LOD) v10
50 ; [VIDEOWALL VIEW] Car lod : maximum LOD (scalar 100=>1) v3
100 ; [VIDEOWALL VIEW] Car lod : distance at which to cull cars in view (metres) v5
52 ; [VIDEOWALL VIEW] Car lod : scalar v2
0 ; [VIDEOWALL VIEW] If using advanced car shader, then we can also (optionally) use improved wheel lighting


H E L L O
Reply Quote
Re: my f1graphics.cfg for ATI Radeon 9600 Pro
Date: June 28, 2005 02:55PM
Posted by: IL Dottore
could someone post a pic of his game with this graphics files? so i can see if mine is better??




Magic Senna
Reply Quote
Re: my f1graphics.cfg for ATI Radeon 9600 Pro
Date: June 28, 2005 03:43PM
Posted by: bones1834









Edited 1 time(s). Last edit at 06/28/2005 04:25PM by bones1834.
Reply Quote
Re: my f1graphics.cfg for ATI Radeon 9600 Pro
Date: June 28, 2005 06:41PM
Posted by: IL Dottore
hmm almost same as mine is shall make a screenie later..




Magic Senna
Reply Quote
Re: my f1graphics.cfg for ATI Radeon 9600 Pro
Date: June 28, 2005 09:02PM
Posted by: IL Dottore
here the screenies:















Magic Senna
Reply Quote
Re: my f1graphics.cfg for ATI Radeon 9600 Pro
Date: June 30, 2005 06:01PM
Posted by: CorruptCop
Hey Bones1834!

Where did you get those high resolution helmets, from your screenshot, Barrichello's helmet looks really good. I'm using the 2005 update sets from TOny and friends, there are helmet textures in the updates, but dont look this good, or my graphics are messed up. I tried your CFG file, it seems to work differently for my Radeon 9600 card.

Thanks for all the feedback!

P.S: How do you paste images in the forum?
Reply Quote
Re: my f1graphics.cfg for ATI Radeon 9600 Pro
Date: June 30, 2005 07:48PM
Posted by: IL Dottore
i guess its mdsnake helmet set. set it at configure in the middel of csm! en set helmet to high :)




Magic Senna
Reply Quote
Re: my f1graphics.cfg for ATI Radeon 9600 Pro
Date: July 12, 2005 03:23AM
Posted by: EddieB
If anyone wants to give mine a try.....

1 ; f1graphics.cfg controls all settings (default 0)
1280 ; [RELEASE] Game 3D Horizontal Resolution
1024 ; [RELEASE] Game 3D Vertical Resolution
1 ; [RELEASE] Enable 32bit mode if available NB. If Windowed then is forced to desktop format
1 ; [RELEASE] Enable hardware T&L if available
0 ; [RELEASE] Run in a window
0 ; [RELEASE] Number of multisamples if available (0-16 :: 0 => off, 1 unused)
0 ; [RELEASE] Force use of reference rasterizer
0 ; [RELEASE] Vsync (0=>off, or every nth frame) v2
67 ; [RELEASE] AutoPerformance (Automatic Performance Setting)
0 ; [RELEASE] TestedPerformanceLow (Tested Performance Setting)
0 ; [RELEASE] TestedPerformanceHigh (Tested Performance Setting)
800 ; [DEBUG] Game 3D Horizontal Resolution
600 ; [DEBUG] Game 3D Vertical Resolution
1 ; [DEBUG] Enable 32bit mode if available NB. If Windowed then is forced to desktop format
1 ; [DEBUG] Enable hardware T&L if available
1 ; [DEBUG] Run in a window
0 ; [DEBUG] Number of multisamples if available (0-16 :: 0 => off, 1 unused)
0 ; [DEBUG] Force use of reference rasterizer
0 ; [DEBUG] Vsync (0=>off, or every nth frame) v2
153 ; [DEBUG] AutoPerformance (Automatic Performance Setting)
0 ; [DEBUG] TestedPerformanceLow (Tested Performance Setting)
0 ; [DEBUG] TestedPerformanceHigh (Tested Performance Setting)
0 ; Texture quality : 0 => max 2 => half 4 => qtr 8 => eigth
1 ; Increase car texture quality (1 on, 0 off)
0 ; Low track geometry (1 on, 0 off)
0 ; Crude quadtree cull only (0=> off, 1=>always, 2=>only for TNL); recommended for fast gfx, low cpu
4 ; Number of mipmaps (0 => off) v2
1 ; Use compressed textures if supported
1 ; Full 32bit textures
7 ; Set 0 => no 8bit alpha (all stencil - yuck) 8 => all 8bit alpha (no stencil - nice) else 1-7 as cut off
1 ; If using compressed then ramp 1bit DXT1 to nbit DXT5 to avoid edge bleed v2
1 ; Render targets must match the main formats v2
1 ; Enable Fogging
1 ; Enable AdvancedCarShader v2
0 ; Low res geometry track (1 low res, 0 normal)
1 ; Rotate wheels via textures v2
0 ; Bump map track (requires DP3; 0 => off)
4 ; Load balance : Frames over which to sample occupancy
110 ; Load balance : Start load decrease if occupancy over this
90 ; Load balance : Start load increase if occupancy under this v2
75 ; Load balance : Speed of load decrease ( < slower > faster)
33 ; Load balance : Speed of load increase ( < slower > faster)
0 ; Enable mirrors
2 ; Angle left mirror 0(in)-16(parallel)-32(out) v2
2 ; Angle right mirror 0(in)-16(parallel)-32(out) v2
16 ; Magnify mirror (16 => normal <16 wide >16 zoom)
133 ; Show own car (0 never, bit 1 trans, bit 2 solid, bit 3 context only bit7-fullpolycar in tcam) v3
1 ; Overide show own car if mirrors set low
0 ; Cockpit zoom (0 to 100) v2
1 ; Enable external view mirrors (0 0ff, 1 onboard, 2 all external views) v2
0 ; Enable track map (0 off, 1 arcade views only, 2 all non trackside)
9 ; Num overdraws for blur effects (eg reflections) Should be one of {2,4,6,9,12,16}
2 ; Reflect effect (0 => none-very sharp reflections), 1 => mipmapfilter, 2 => overdraw(best), 3 => hardwareboxfilter, 4 => swmungefilter(2nd best-best for 16bit), 5 => jitter(GP3 stylee) v3
512 ; If Jitter, how many ?
60 ; For normal reflections scale LOD (0 to 100%) v3
20 ; For blured effect reflections scale LOD (0 to 100%) v3
1 ; Maximum allowed heat hazes in a single view v2
0 ; Haze size in pixels : 0 => auto as proportion of main resolution (recommended)
1 ; Enable rain droplets on lens/visor
0 ; Enable visor when in cockpit view
0 ; Full dynamic video walls
0 ; Size of video wall textures (dynamic) 0=>auto scale to game resolution
200000 ; Number of particle time slices per second.
0 ; TV style overlays on track cameras.
24 ; Multiplayer overlays 1:on 2:+cockpit 3:+allviews 4:+text 5:+gfx 6:+allcars
4 ; Multiplayer overlays - show for N closest
0 ; Enable user-defined gamma ramp v2
100 ; Gamma ramp for Reds (min value) range signed : 0-200 => -1 to 1 v4
200 ; Gamma ramp for Reds (max value) range signed : 0-200 => -1 to 1 v4
200 ; Gamma ramp for Reds (pow value) range signed : 0-200 => -1 to 1 v4
100 ; Gamma ramp for Greens (min value) range signed : 0-200 => -1 to 1 v4
200 ; Gamma ramp for Greens (max value) range signed : 0-200 => -1 to 1 v4
200 ; Gamma ramp for Greens (pow value) range signed : 0-200 => -1 to 1 v4
100 ; Gamma ramp for Blues (min value) range signed : 0-200 => -1 to 1 v4
200 ; Gamma ramp for Blues (max value) range signed : 0-200 => -1 to 1 v4
200 ; Gamma ramp for Blues (pow value) range signed : 0-200 => -1 to 1 v4
131 ; Enable cockpit gamma 0 off,1 player for all, 2 player for player only, 3 driver specific. Bit 7 (only when visor on) v2
100 ; Cockpit Gamma ramp for Reds (min value) range signed : 0-200 => -1 to 1 v3
190 ; Cockpit Gamma ramp for Reds (max value) range signed : 0-200 => -1 to 1 v3
190 ; Cockpit Gamma ramp for Reds (pow value) range signed : 0-200 => -1 to 1 v3
100 ; Cockpit Gamma ramp for Greens (min value) range signed : 0-200 => -1 to 1 v3
190 ; Cockpit Gamma ramp for Greens (max value) range signed : 0-200 => -1 to 1 v3
190 ; Cockpit Gamma ramp for Greens (pow value) range signed : 0-200 => -1 to 1 v3
100 ; Cockpit Gamma ramp for Blues (min value) range signed : 0-200 => -1 to 1 v3
190 ; Cockpit Gamma ramp for Blues (max value) range signed : 0-200 => -1 to 1 v3
190 ; Cockpit Gamma ramp for Blues (pow value) range signed : 0-200 => -1 to 1 v3
64 ; Size in texels for shadows over each car v2
128 ; Size in texels for projected shadows under each car
128 ; Size in texels for blurred projected shadows under each car
0 ; Attempt to page the over shadows
0 ; Attempt to page the under shadows
1 ; Animation rendering mode. (0 - cheap lighting, 1 - proper lighting, 2 - VS) v2
5 ; [MAIN VIEW] Texture filter quality (0 => none, 1 => point, 2 => bilinear, 3 => anisotropic, 4 => flatcubic, 5 => gaussiancubic) v3
5 ; [MAIN VIEW] Texture filter quality for mipmaps - if any - (0 => none, 1 => point, 2 => bilinear, 3 => anisotropic, 4 => flatcubic/quincunx, 5 => gaussiancubic) v3
2 ; [MAIN VIEW] Max anisotropic filtering (1 => off, to max 7) v2
92 ; [MAIN VIEW] Mipmap bias (0 => -8 to 200 => +8) -ve=> sharper v2
1600 ; [MAIN VIEW] Distance cull ALL track objects past this distance (overides LOD, 0 => off) v2
5 ; [MAIN VIEW] Fade out (cull) track objects band depth as % of cull distance (0 => immediate at cull point)
50 ; [MAIN VIEW] Scale track LOD distance - make larger to force lower LOD earlier
0 ; [MAIN VIEW] Constant min distance in metres for track LOD calcs - make larger to force lower max LOD - else 0 for full LOD range
300 ; [MAIN VIEW] Threshold distance in metres to switch in low LOD track
1 ; [MAIN VIEW] Display track shadows
3 ; [MAIN VIEW] Shadow type (under cars) (0=> off, 1=> static, 2=> composite, 3=> projected)
16 ; [MAIN VIEW] Blur shadows (projected shadows only)(should be 0 (no blur),2,4,6,9,12, or 16)
4 ; [MAIN VIEW] Max number of shadow maps that are allowed in view UNDER CAR
4 ; [MAIN VIEW] Max number of shadow maps that are allowed in view OVER CAR
1 ; [MAIN VIEW] Enable wet weather reflections (if main view is disabled, then all views are disabled)
10 ; [MAIN VIEW] Reflect static objects within this distance (0 => off) v3
1 ; [MAIN VIEW] Reflect cars in wet track
1 ; [MAIN VIEW] Reflect car particles (broken subassemly) in wet track v3
1 ; [MAIN VIEW] Enable static environment reflections (0=>off 1=>on) v3
200 ; [MAIN VIEW] Enable dynamic environment reflections to X metres (for advanced carshader only) v3
0 ; [MAIN VIEW] Max number of dynamic envmaps to use (1 to 22(!), 0=>off - for advanced carshader only) v3
1 ; [MAIN VIEW] Draw Particles
1 ; [MAIN VIEW] Draw rain (0 => off, 1 => on)
1 ; [MAIN VIEW] DrawBrakeGlows (0 => off, 1 => on)
1 ; [MAIN VIEW] DrawExternalSteering (0 => off, 1 => on)
0 ; [MAIN VIEW] Draw crowds (0 => off, 1 => on, 2 => on and animating)
0 ; [MAIN VIEW] Draw X objects in pit lane (0 => off, else max number of 'teams' to draw)
0 ; [MAIN VIEW] Draw crowd camera flashes
1 ; [MAIN VIEW] Draw sky
0 ; [MAIN VIEW] Draw heat haze v3
1 ; [MAIN VIEW] Draw lens flare (0 => off, 1 => 'real' camera views only, 2 => all views but cockpit, 3 => always)
1 ; [MAIN VIEW] Draw Bushes
1 ; [MAIN VIEW] Draw trackside cameras
1 ; [MAIN VIEW] Draw trackside cranes
0 ; [MAIN VIEW] Draw distant buildings
1 ; [MAIN VIEW] Draw near buildings
1 ; [MAIN VIEW] Draw horizon strips
1 ; [MAIN VIEW] Draw trackside photographers
2 ; [MAIN VIEW] Draw track (0 => off, 1 => basic, 2 => with detail maps)
1 ; [MAIN VIEW] Draw trackside platforms
1 ; [MAIN VIEW] Draw videowalls
1 ; [MAIN VIEW] Draw Misc. trackside objects
1 ; [MAIN VIEW] Draw trackside fences
1 ; [MAIN VIEW] Draw trackside walls
1 ; [MAIN VIEW] Draw track kerbing
1 ; [MAIN VIEW] Draw bridges
1 ; [MAIN VIEW] Draw Near stands
0 ; [MAIN VIEW] Draw Far stands
1 ; [MAIN VIEW] Draw Near land
0 ; [MAIN VIEW] Draw Far land
1 ; [MAIN VIEW] Draw track marshalls
1 ; [MAIN VIEW] Draw large trackside signs
1 ; [MAIN VIEW] Draw small trackside signs
1 ; [MAIN VIEW] Draw Near trees
0 ; [MAIN VIEW] Draw Far trees
0 ; [MAIN VIEW] Draw video-wall screens
1 ; [MAIN VIEW] Draw shadows on track v2
1 ; [MAIN VIEW] Draw Required trackside buildings
46 ; [MAIN VIEW] Car lod : load balance as % of notional max possible number of car polys (at highest LOD) v9
80 ; [MAIN VIEW] Car lod : maximum LOD (scalar 100=>1) v2
680 ; [MAIN VIEW] Car lod : distance at which to cull cars in view (metres) v3
80 ; [MAIN VIEW] Car lod : scalar
1 ; [MAIN VIEW] If using advanced car shader, then we can also (optionally) use improved wheel lighting
2 ; [MIRROR VIEW] Texture filter quality (0 => none, 1 => point, 2 => bilinear, 3 => anisotropic, 4 => flatcubic, 5 => gaussiancubic) v3
1 ; [MIRROR VIEW] Texture filter quality for mipmaps - if any - (0 => none, 1 => point, 2 => bilinear, 3 => anisotropic, 4 => flatcubic/quincunx, 5 => gaussiancubic) v3
1 ; [MIRROR VIEW] Max anisotropic filtering (1 => off, to max 7) v2
115 ; [MIRROR VIEW] Mipmap bias (0 => -8 to 200 => +8) -ve=> sharper v2
700 ; [MIRROR VIEW] Distance cull ALL track objects past this distance (overides LOD, 0 => off)
5 ; [MIRROR VIEW] Fade out (cull) track objects band depth as % of cull distance (0 => immediate at cull point)
190 ; [MIRROR VIEW] Scale track LOD distance - make larger to force lower LOD earlier
99 ; [MIRROR VIEW] Constant min distance in metres for track LOD calcs - make larger to force lower max LOD - else 0 for full LOD range
50 ; [MIRROR VIEW] Threshold distance in metres to switch in low LOD track
0 ; [MIRROR VIEW] Display track shadows
1 ; [MIRROR VIEW] Shadow type (under cars) (0=> off, 1=> static, 2=> composite, 3=> projected)
0 ; [MIRROR VIEW] Blur shadows (projected shadows only)(should be 0 (no blur),2,4,6,9,12, or 16)
2 ; [MIRROR VIEW] Max number of shadow maps that are allowed in view UNDER CAR
2 ; [MIRROR VIEW] Max number of shadow maps that are allowed in view OVER CAR
0 ; [MIRROR VIEW] Enable wet weather reflections
50 ; [MIRROR VIEW] Reflect static objects within this distance (0 => off)
0 ; [MIRROR VIEW] Reflect cars in wet track
0 ; [MIRROR VIEW] Reflect car particles (broken subassemly) in wet track v2
0 ; [MIRROR VIEW] Enable static environment reflections (0=>off 1=>on) v3
0 ; [MIRROR VIEW] Enable dynamic environment reflections to X metres (for advanced carshader only) v3
0 ; [MIRROR VIEW] Max number of dynamic envmaps to use (1 to 22(!), 0=>off - for advanced carshader only) v3
1 ; [MIRROR VIEW] Draw Particles
0 ; [MIRROR VIEW] Draw rain (0 => off, 1 => on)
0 ; [MIRROR VIEW] DrawBrakeGlows (0 => off, 1 => on)
0 ; [MIRROR VIEW] DrawExternalSteering (0 => off, 1 => on)
0 ; [MIRROR VIEW] Draw crowds (0 => off, 1 => on, 2 => on and animating) v2
1 ; [MIRROR VIEW] Draw X objects in pit lane (0 => off, else max number of 'teams' to draw) v2
1 ; [MIRROR VIEW] Draw crowd camera flashes v2
1 ; [MIRROR VIEW] Draw sky v2
0 ; [MIRROR VIEW] Draw heat haze v2
0 ; [MIRROR VIEW] Draw lens flare (0 => off, 1 => 'real' camera views only, 2 => all views but cockpit, 3 => always) v2
1 ; [MIRROR VIEW] Draw Bushes v2
1 ; [MIRROR VIEW] Draw trackside cameras v2
1 ; [MIRROR VIEW] Draw trackside cranes v2
0 ; [MIRROR VIEW] Draw distant buildings v2
1 ; [MIRROR VIEW] Draw near buildings v2
1 ; [MIRROR VIEW] Draw horizon strips v2
1 ; [MIRROR VIEW] Draw trackside photographers v2
1 ; [MIRROR VIEW] Draw track (0 => off, 1 => basic, 2 => with detail maps) v2
1 ; [MIRROR VIEW] Draw trackside platforms v2
1 ; [MIRROR VIEW] Draw videowalls v2
1 ; [MIRROR VIEW] Draw Misc. trackside objects v2
1 ; [MIRROR VIEW] Draw trackside fences v2
1 ; [MIRROR VIEW] Draw trackside walls v2
1 ; [MIRROR VIEW] Draw track kerbing v2
1 ; [MIRROR VIEW] Draw bridges v2
1 ; [MIRROR VIEW] Draw Near stands v2
0 ; [MIRROR VIEW] Draw Far stands v2
1 ; [MIRROR VIEW] Draw Near land v2
0 ; [MIRROR VIEW] Draw Far land v2
1 ; [MIRROR VIEW] Draw track marshalls v2
1 ; [MIRROR VIEW] Draw large trackside signs v2
1 ; [MIRROR VIEW] Draw small trackside signs v2
1 ; [MIRROR VIEW] Draw Near trees v2
0 ; [MIRROR VIEW] Draw Far trees v2
1 ; [MIRROR VIEW] Draw video-wall screens v2
1 ; [MIRROR VIEW] Draw shadows on track v2
1 ; [MIRROR VIEW] Draw Required trackside buildings
19 ; [MIRROR VIEW] Car lod : load balance as % of notional max possible number of car polys (at highest LOD) v9
57 ; [MIRROR VIEW] Car lod : maximum LOD (scalar 100=>1) v2
320 ; [MIRROR VIEW] Car lod : distance at which to cull cars in view (metres) v2
57 ; [MIRROR VIEW] Car lod : scalar
0 ; [MIRROR VIEW] If using advanced car shader, then we can also (optionally) use improved wheel lighting
2 ; [VIDEOWALL VIEW] Texture filter quality (0 => none, 1 => point, 2 => bilinear, 3 => anisotropic, 4 => flatcubic, 5 => gaussiancubic) v3
1 ; [VIDEOWALL VIEW] Texture filter quality for mipmaps - if any - (0 => none, 1 => point, 2 => bilinear, 3 => anisotropic, 4 => flatcubic/quincunx, 5 => gaussiancubic) v3
1 ; [VIDEOWALL VIEW] Max anisotropic filtering (1 => off, to max 7) v2
115 ; [VIDEOWALL VIEW] Mipmap bias (0 => -8 to 200 => +8) -ve=> sharper v2
925 ; [VIDEOWALL VIEW] Distance cull ALL track objects past this distance (overides LOD, 0 => off)
5 ; [VIDEOWALL VIEW] Fade out (cull) track objects band depth as % of cull distance (0 => immediate at cull point)
177 ; [VIDEOWALL VIEW] Scale track LOD distance - make larger to force lower LOD earlier
87 ; [VIDEOWALL VIEW] Constant min distance in metres for track LOD calcs - make larger to force lower max LOD - else 0 for full LOD range
100 ; [VIDEOWALL VIEW] Threshold distance in metres to switch in low LOD track
1 ; [VIDEOWALL VIEW] Display track shadows
1 ; [VIDEOWALL VIEW] Shadow type (under cars) (0=> off, 1=> static, 2=> composite, 3=> projected)
0 ; [VIDEOWALL VIEW] Blur shadows (projected shadows only)(should be 0 (no blur),2,4,6,9,12, or 16)
2 ; [VIDEOWALL VIEW] Max number of shadow maps that are allowed in view UNDER CAR
2 ; [VIDEOWALL VIEW] Max number of shadow maps that are allowed in view OVER CAR
0 ; [VIDEOWALL VIEW] Enable wet weather reflections
50 ; [VIDEOWALL VIEW] Reflect static objects within this distance (0 => off)
0 ; [VIDEOWALL VIEW] Reflect cars in wet track
0 ; [VIDEOWALL VIEW] Reflect car particles (broken subassemly) in wet track v2
0 ; [VIDEOWALL VIEW] Enable static environment reflections (0=>off 1=>on) v3
0 ; [VIDEOWALL VIEW] Enable dynamic environment reflections to X metres (for advanced carshader only) v3
0 ; [VIDEOWALL VIEW] Max number of dynamic envmaps to use (1 to 22(!), 0=>off - for advanced carshader only) v3
1 ; [VIDEOWALL VIEW] Draw Particles
0 ; [VIDEOWALL VIEW] Draw rain (0 => off, 1 => on)
0 ; [VIDEOWALL VIEW] DrawBrakeGlows (0 => off, 1 => on)
0 ; [VIDEOWALL VIEW] DrawExternalSteering (0 => off, 1 => on)
0 ; [VIDEOWALL VIEW] Draw crowds (0 => off, 1 => on, 2 => on and animating) v2
1 ; [VIDEOWALL VIEW] Draw X objects in pit lane (0 => off, else max number of 'teams' to draw) v2
1 ; [VIDEOWALL VIEW] Draw crowd camera flashes v2
1 ; [VIDEOWALL VIEW] Draw sky v2
0 ; [VIDEOWALL VIEW] Draw heat haze v2
0 ; [VIDEOWALL VIEW] Draw lens flare (0 => off, 1 => 'real' camera views only, 2 => all views but cockpit, 3 => always) v2
1 ; [VIDEOWALL VIEW] Draw Bushes v2
1 ; [VIDEOWALL VIEW] Draw trackside cameras v2
1 ; [VIDEOWALL VIEW] Draw trackside cranes v2
0 ; [VIDEOWALL VIEW] Draw distant buildings v2
1 ; [VIDEOWALL VIEW] Draw near buildings v2
1 ; [VIDEOWALL VIEW] Draw horizon strips v2
1 ; [VIDEOWALL VIEW] Draw trackside photographers v2
1 ; [VIDEOWALL VIEW] Draw track (0 => off, 1 => basic, 2 => with detail maps) v2
1 ; [VIDEOWALL VIEW] Draw trackside platforms v2
1 ; [VIDEOWALL VIEW] Draw videowalls v2
1 ; [VIDEOWALL VIEW] Draw Misc. trackside objects v2
1 ; [VIDEOWALL VIEW] Draw trackside fences v2
1 ; [VIDEOWALL VIEW] Draw trackside walls v2
1 ; [VIDEOWALL VIEW] Draw track kerbing v2
1 ; [VIDEOWALL VIEW] Draw bridges v2
1 ; [VIDEOWALL VIEW] Draw Near stands v2
0 ; [VIDEOWALL VIEW] Draw Far stands v2
1 ; [VIDEOWALL VIEW] Draw Near land v2
0 ; [VIDEOWALL VIEW] Draw Far land v2
1 ; [VIDEOWALL VIEW] Draw track marshalls v2
1 ; [VIDEOWALL VIEW] Draw large trackside signs v2
1 ; [VIDEOWALL VIEW] Draw small trackside signs v2
1 ; [VIDEOWALL VIEW] Draw Near trees v2
0 ; [VIDEOWALL VIEW] Draw Far trees v2
1 ; [VIDEOWALL VIEW] Draw video-wall screens v2
1 ; [VIDEOWALL VIEW] Draw shadows on track v2
1 ; [VIDEOWALL VIEW] Draw Required trackside buildings
22 ; [VIDEOWALL VIEW] Car lod : load balance as % of notional max possible number of car polys (at highest LOD) v10
60 ; [VIDEOWALL VIEW] Car lod : maximum LOD (scalar 100=>1) v3
367 ; [VIDEOWALL VIEW] Car lod : distance at which to cull cars in view (metres) v5
60 ; [VIDEOWALL VIEW] Car lod : scalar v2
0 ; [VIDEOWALL VIEW] If using advanced car shader, then we can also (optionally) use improved wheel lighting






Edited 1 time(s). Last edit at 07/12/2005 03:24AM by EddieB.
Reply Quote
Newer Topic Older Topic
Sorry, only registered users may post in this forum.

Click here to login

Maintainer: mortal, stephan | Design: stephan, Lo2k | Moderatoren: mortal, TomMK, Noog, stephan | Downloads: Lo2k | Supported by: Atlassian Experts Berlin | Forum Rules | Policy