ATi Radeon 9500Pro

Posted by F1Master 
ATi Radeon 9500Pro
Date: June 16, 2003 02:08PM
Posted by: F1Master
I live in Britain and was wondering how much should I pay for one of these. My TNT2 Pro is getting on and with all the lovely hi-res updates I'm putting in the game the less and less its able to cope these days.
Re: ATi Radeon 9500Pro
Date: June 16, 2003 07:25PM
Posted by: kit-kat
ati 9500pro 128mb agp £129

thats from INFINITI in glasgow scotland, they might post dont know you could phone & ask!! very good on there prices!!!

would not pay more then that though


[www.infiniti.co.uk]



------------------------------------------------------------------------------------------------

QUIT DREAMING THIS IS REAL LIFE BABY!!!
Re: ATi Radeon 9500Pro
Date: June 17, 2003 01:39AM
Posted by: tis
I would suggest that you get the Sapphire radeon 9500 128Mb non-pro card. It costs the same but you can get a little patch for the cards bios which allows it to run the same as a 9700 bit at half the cost. It works a treat. Komplett stock the card. Try to get the red PCB with the memory in the L configuration as some other PCB designs don't allow the mod. You can get the pathc and all instructions to do it at www.designtechnia.com. The cards are getting hard to find so you might have to do a bit of searching.

regards

P.S. Ignore the sig, its an older spec PC.



Remember that you are unique, just like everyone else.
Re: ATi Radeon 9500Pro
Date: June 17, 2003 01:59AM
Posted by: Korn_Freak

so why not change ure sig to something else then?



Re: ATi Radeon 9500Pro
Date: June 17, 2003 10:56AM
Posted by: Muks_C
Whats the actual difference between the Radeon 9500 and the Radeon 9500 Pro? Is it worth getting the Pro version over the standard or not?
Re: ATi Radeon 9500Pro
Date: June 17, 2003 12:11PM
Posted by: F1Master
Can't the non-pro card be patched to run at higher speeds too? If I could get 9700 performance from a 9500 then I think I'll opt for that one - any prices on that Sapphire?

I think the Pro has a slighter higher clock speed than the non pro.

Is it true that 9500's and above come with their own power supply because they are so bloody powerful? :-)
Re: ATi Radeon 9500Pro
Date: June 17, 2003 12:41PM
Posted by: jginete
would suggest that you get the Sapphire radeon 9500 128Mb non-pro card. It costs the same but you can get a little patch for the cards bios which allows it to run the same as a 9700 bit at half the cost.

nop... the 9500pro can be "overclocked" to use the 8 pipelines (bcause they are 9700pro that didn't work perfectly with 8 pipelines, but u can actually turn they on... but olny on the pros...



Re: ATi Radeon 9500Pro
Date: June 17, 2003 03:49PM
Posted by: captainvik
Don't agree with that advice either....

I got the 9500 standard version tried all the mods etc. only to find it made very little difference if any ( I couldn't see it) plus it risks damaging the card.

Luckily the PC shop I bought it from straight swapped it for an Excalibur 9500 Pro and I tried the mods and overclocks on it too.

The card is so damn fast thought that I copied the original Bios back and just run it standard with no o/c at all.

So go for the 9500Pro version 128mb as they are competively priced now.

cheers
vik :)



P4 2.85gig Albatron mobo 512mb Corsair3200LL Ram 19"Auriga Mon. SBLive! + 4point surround spkrs. Thrustmaster F1 FF Wheel. Radeon9500pro Cat3.4 drivers. GP4 55fps 1024*768 - No VideoWalls/HeatHaze - Mirrors On.
Re: ATi Radeon 9500Pro
Date: June 17, 2003 07:48PM
Posted by: tis
Gentlemen,

The mod is not an overclock! It doesn't make the card run at faster speeds. The only difference between the 9500 and the 9700 is the number of pipelines.

The 9500 pro is a different PCB to the 9500. The mod will only work on the 9500 using the 9700 PCB, which is the way the original 9500's were introduced. The mod is just enables all 8 pipleines in the processor and doubles the bandwidth to 256bit as opposed to 128bit. The pro version of this card cannot be modified in this way to give this extra performance.


@captainvik:
The mod just modifies the bios on the card thus enabling the extra pipelines and bandwidth. It does not overclock the card so there is no risk of damage if you do things correctly. I have done it and my 9500 now has the same performance as a 9700. If yours didn't work either you didn't have the correct card (9500 non-pro, 128Mb on the 9700 PCB) or the patch wasn't applied correctly. If had the right card and applied the patch you would have noticed the difference :)



Remember that you are unique, just like everyone else.
Re: ATi Radeon 9500Pro
Date: June 18, 2003 02:01AM
Posted by: rayg
ATI RADEON 9700 PRO 128MB £170 Ebay!

Job Done, then you don't need to worry about all this clocking rubbish! ;-)
Re: ATi Radeon 9500Pro
Date: June 18, 2003 12:13PM
Posted by: F1Master
When looking for this card I've come across some strange labelling. Is this 9500 often referred to as a 9600?

If so then a Sapphire 9600 128mb is just £96 on overclockers.co.uk.
Re: ATi Radeon 9500Pro
Date: June 19, 2003 02:44AM
Posted by: bazza
The 9600 replaced the 9500. But the 9500 is faster, confusingly.

The order of goodness is 9600,9500,9700,9800.
The pro is better than the non-pro in all cases.

Baz

Re: ATi Radeon 9500Pro
Date: June 19, 2003 11:39PM
Posted by: captainvik
effin rubbish !

get the Pro version and DO NOT bother with those mod bios etc.

they do not work correctly and WILL damage the card....

9500Pro is faster than 9600

cheers
vik



P4 2.85gig Albatron mobo 512mb Corsair3200LL Ram 19"Auriga Mon. SBLive! + 4point surround spkrs. Thrustmaster F1 FF Wheel. Radeon9500pro Cat3.4 drivers. GP4 55fps 1024*768 - No VideoWalls/HeatHaze - Mirrors On.
Re: ATi Radeon 9500Pro
Date: June 20, 2003 02:02AM
Posted by: tis
vik, they do work correctly and they will Not damage the card. All that is happening is the extra pipelines are being enabled. If the patch did not work correctly then all you have to do is a simple rollback and viola you have a normal healthy card again. If it proved too complicated for you to achieve then maybe you shouldn't be commenting on the proceedure :)
Sorry, only registered users may post in this forum.

Click here to login

Maintainer: mortal, stephan | Design: stephan, Lo2k | Moderatoren: mortal, TomMK, Noog, stephan | Downloads: Lo2k | Supported by: Atlassian Experts Berlin | Forum Rules | Policy