Mercedes AMG Petronas F1 W03 : Released

Posted by RSCT 
Re: Mercedes AMG Petronas F1 W03 : Released
Date: April 13, 2012 09:52AM
Posted by: rracunis
RSCT Wrote:
-------------------------------------------------------
> New link available 1st post with:
> - Lower lods.
> - Main color on the top of the cockpit fixed.

Thank you so much for the car .
I found out a problem with the driver's texture in this update . The first car released didn't have it .
Maybe I have done some mistake , please could you check that ?
Greetings

Ricardo
Re: Mercedes AMG Petronas F1 W03 : Released
Date: April 13, 2012 06:44PM
Posted by: Excalibur
rracunis écrivait:
-------------------------------------------------------
> RSCT Wrote:
> --------------------------------------------------
> -----
> > New link available 1st post with:
> > - Lower lods.
> > - Main color on the top of the cockpit fixed.
>
> Thank you so much for the car .
> I found out a problem with the driver's texture in
> this update . The first car released didn't have
> it .
> Maybe I have done some mistake , please could you
> check that ?
> Greetings
>
> Ricardo

I checked the both cars once again and the w03_driver texture is correctly assigned to the cars.
Are you sure you didn't check lower lods for this?
.If yes, it is normal. Lod_0 have got 28 objects, lower lods from 1 to 3, 24 objects, lod_4, a single object , without z_cockpit_insert (driver), visor and the 2 mirrors. So the driver texture isn't assigned on lower lods.

I hope you didn't replace lod_1 as lod_0... check! ;-)

____________________________________________________________________________________________________________________________________________

Re: Mercedes AMG Petronas F1 W03 : Released
Date: April 13, 2012 07:43PM
Posted by: rracunis
yes , I did that ... how to fix the problem ?
Re: Mercedes AMG Petronas F1 W03 : Released
Date: April 13, 2012 08:05PM
Posted by: Excalibur
rracunis écrivait:
-------------------------------------------------------
> yes , I did that ... how to fix the problem ?

Download the archive again (link 1st post).

-If you want to use the best shapes in game only, put the two cars lod_0 only with all the textures into your wad. You can use Teameditor to force the best shapes in game.
-Lower lods are necessary if you have a small PC configuration. It allows to use shapes with less details when you see the cars far away from the camera or when the cars are at the other side of the track and that you don't see them at all. Using lower lods reduce your PO: So put the 10 lods with all the textures into your wad.

Choose your preference: lods_0 only or all the lods.

____________________________________________________________________________________________________________________________________________





Edited 2 time(s). Last edit at 04/13/2012 08:08PM by Excalibur.
Re: Mercedes AMG Petronas F1 W03 : Released
Date: April 13, 2012 11:20PM
Posted by: rracunis
Excalibur Wrote:
-------------------------------------------------------
> rracunis écrivait:
> --------------------------------------------------
> -----
> > yes , I did that ... how to fix the problem ?
>
> Download the archive again (link 1st post).
>
> -If you want to use the best shapes in game only,
> put the two cars lod_0 only with all the textures
> into your wad. You can use Teameditor to force the
> best shapes in game.
> -Lower lods are necessary if you have a small PC
> configuration. It allows to use shapes with less
> details when you see the cars far away from the
> camera or when the cars are at the other side of
> the track and that you don't see them at all.
> Using lower lods reduce your PO: So put the 10
> lods with all the textures into your wad.
>
> Choose your preference: lods_0 only or all the
> lods.

Thank you so much for your help but it hasn't been working well . The first released car worked perfectly but after I upload my MOD with the "new" car the problem is there .
I chose the lod_0 only with the new textures released ( actually the same ones of the first release ) and the w03_driver texture doesn't appear . I checked the cars lods with the gp4builder and everything is OK , just ingame isn't working .
I also tried use the "old" lods with the new textures and vice versa but nothing happened .
So I decided to keep installed the first car released but would like to know why it has happened .



Edited 1 time(s). Last edit at 04/13/2012 11:22PM by rracunis.
Re: Mercedes AMG Petronas F1 W03 : Released
Date: April 24, 2012 04:53AM
Posted by: TomMK
Tweaker file coordinates for this car:


; ============================================================================
; GP4 Tweaker
; Car positions configuration by GP4 Central
; Mercedes W03 by RSCT Modding Group 
; ============================================================================

[ARMS_POSITIONS]
driver07	=  0.0000, -0.0400, -0.0300 
driver08	=  0.0000, -0.0400, -0.0300 

[HELMET_POSITIONS]
driver07	=  0.0000,  0.1380, -0.0100 
driver08	=  0.0000,  0.1380, -0.0100 

[EXTERNAL_STEER_POSITIONS]
driver07	=  0.0000,  0.0050,  0.2150 
driver08	=  0.0000,  0.0050,  0.2150 

[REAR_LIGHT_AMBIENT01_POS]
driver07	=  0.0000, -0.1330, -2.4570 
driver08	=  0.0000, -0.1330, -2.4570 

[TYRE_POSITIONS_CAR07]
FrontRight	=  0.7000, -0.2280,  1.4970 
FrontLeft	= -0.7000, -0.2280,  1.4970 
RearRight	=  0.7000, -0.2280, -1.9380 
RearLeft	= -0.7000, -0.2280, -1.9380 

[TYRE_POSITIONS_CAR08]
FrontRight	=  0.7000, -0.2280,  1.4970 
FrontLeft	= -0.7000, -0.2280,  1.4970 
RearRight	=  0.7000, -0.2280, -1.9380 
RearLeft	= -0.7000, -0.2280, -1.9380 

[ONBOARD_CAMERA_CAR07]
Cockpit         =  0.0000,  0.1400, -0.4800,    0.00,  -0.30,  0.00
Driver          =  0.0000,  0.1500,  1.4970,  180.00,   0.00,  0.00
FrontRight      =  0.2800,  0.2760, -0.4600,    0.00,  -3.00,  0.00
RearRight       =  0.4600,  0.2000, -1.7380,    0.00,   0.00,  0.00
RearRightBack   =  0.2700,  0.3700, -0.5880,  180.00, -15.00,  0.00
RearCenter      =  0.0000, -0.1330, -2.4570,  180.00,   0.00,  0.00
RearLeftBack    = -0.2700,  0.3700, -0.5880,  180.00, -15.00,  0.00
RearLeft        = -0.4600,  0.2000, -1.7380,    0.00,   0.00,  0.00
FrontLeft       = -0.3000,  0.1600,  0.3900,  127.00,  -7.00,  0.00
Nose            =  0.0000,  0.1700,  2.2670,    0.00,   0.00,  0.00
FrontWing       =  0.3000, -0.3300,  2.2670,  180.00,   3.00,  0.00
TVCockpit       = -0.0700,  0.5600, -0.3400,    0.00, -12.00,  0.00

[ONBOARD_CAMERA_CAR08]
Cockpit         =  0.0000,  0.1400, -0.4800,    0.00,  -0.30,  0.00
Driver          =  0.0000,  0.1500,  1.4970,  180.00,   0.00,  0.00
FrontRight      =  0.2800,  0.2760, -0.4600,    0.00,  -3.00,  0.00
RearRight       =  0.4600,  0.2000, -1.7380,    0.00,   0.00,  0.00
RearRightBack   =  0.2700,  0.3700, -0.5880,  180.00, -15.00,  0.00
RearCenter      =  0.0000, -0.1330, -2.4570,  180.00,   0.00,  0.00
RearLeftBack    = -0.2700,  0.3700, -0.5880,  180.00, -15.00,  0.00
RearLeft        = -0.4600,  0.2000, -1.7380,    0.00,   0.00,  0.00
FrontLeft       = -0.3000,  0.1600,  0.3900,  127.00,  -7.00,  0.00
Nose            =  0.0000,  0.1700,  2.2670,    0.00,   0.00,  0.00
FrontWing       =  0.3000, -0.3300,  2.2670,  180.00,   3.00,  0.00
TVCockpit       = -0.0700,  0.5600, -0.3400,    0.00, -12.00,  0.00

[CAMERA_VIEW_ANGLE_CAR07]
Cockpit         =  0.0000,  0.0000,  0.00,    0.00
Driver          =  0.0550,  0.0550, -0.24,    0.00
FrontRight      =  0.7300,  0.5300, -0.24,  400.00
RearRight       =  0.7100,  0.7100, -0.23,    0.30
RearRightBack   =  0.9100,  0.9100, -0.28,  400.00
RearCenter      =  0.2000,  0.0000,  0.00,    0.00
RearLeftBack    =  0.9100,  0.9100, -0.28,  400.00
RearLeft        =  0.7100,  0.7100, -0.23,    0.30
FrontLeft       =  0.7500,  0.7500, -0.28,   30.00
Nose            =  0.2000,  0.0000,  0.00,  160.00
FrontWing       =  0.4000,  0.5000, -0.30,    0.00
TVCockpit       =  0.2500,  0.2000, -0.14,    0.00

[CAMERA_VIEW_ANGLE_CAR08]
Cockpit         =  0.0000,  0.0000,  0.00,    0.00
Driver          =  0.0550,  0.0550, -0.24,    0.00
FrontRight      =  0.7300,  0.5300, -0.24,  400.00
RearRight       =  0.7100,  0.7100, -0.23,    0.30
RearRightBack   =  0.9100,  0.9100, -0.28,  400.00
RearCenter      =  0.2000,  0.0000,  0.00,    0.00
RearLeftBack    =  0.9100,  0.9100, -0.28,  400.00
RearLeft        =  0.7100,  0.7100, -0.23,    0.30
FrontLeft       =  0.7500,  0.7500, -0.28,   30.00
Nose            =  0.2000,  0.0000,  0.00,  160.00
FrontWing       =  0.4000,  0.5000, -0.30,    0.00
TVCockpit       =  0.2500,  0.2000, -0.14,    0.00

=====================================================


Intel NUC 8i3, 8GB RAM, MS Sidewinder Wheel
Re: Mercedes AMG Petronas F1 W03 : Released
Date: April 24, 2012 12:39PM
Posted by: Excalibur
Thank you very much for all these tweaker settings concerning the W03 , TomMK ;-)

If you have time and if you wish, could you make the same for the HRT, please? I always post tyrepos.ini and rearlight.ini but as I use teameditor for the others settings, I don't post complete tweaker settings.
[www.grandprixgames.org]

Anyway, thanks for your contribution on all RSCT cars :-)

____________________________________________________________________________________________________________________________________________





Edited 1 time(s). Last edit at 04/24/2012 12:47PM by Excalibur.
Re: Mercedes AMG Petronas F1 W03 : Released
Date: May 01, 2012 01:29PM
Posted by: ramf1v
One of the best looking cars I've seen. lovely texturing job, thanks.
Here it is in my WIP garage, it looks stunning, better renders to follow (I lack the patience to render)



F1Dev
Re: Mercedes AMG Petronas F1 W03 : Released
Date: May 01, 2012 02:16PM
Posted by: Excalibur
Great render, thanks! :-)

Your 3D garage looks very nice! (Y)

____________________________________________________________________________________________________________________________________________

Re: Mercedes AMG Petronas F1 W03 : Released
Date: May 01, 2012 03:42PM
Posted by: ramf1v
Thx, It's just the base sketch layout, I'm working on all the garages of 2012, but this car has made me focus on Mercedes for a while.
My "good" pc is in for repair, I don't have the patience to render on a P4. ;-)

F1Dev
Sorry, only registered users may post in this forum.

Click here to login

Maintainer: mortal, stephan | Design: stephan, Lo2k | Moderatoren: mortal, TomMK, Noog, stephan | Downloads: Lo2k | Supported by: Atlassian Experts Berlin | Forum Rules | Policy