Split axis - doesn't work under GP3

My GP3 work perfectly with Logitech FF @ combined axis. I try to setup split axis, but can't. I go to options menu and try to set Joystick A (X), Joystick A , Joystick B (X) or Joystick B but nothing work. Wheel work OK but pedals don't.

Plz help.

From the Sticky:FORUM RULES, GP3 FAQ And Installation Guide. PLEASE READ! right above his one:


4.14.1 How can I setup my wheel for split axis?

First be sure that you have enabled split axis in the setup of your gaming device in the windows control panel or in the driver software of your wheel.
In the main menu got to "Options --> Controls --> Advanced". Under "Choose Control Method" click on "Not Used

---

REHAB IS FOR QUITTERS

I read this. I don't have "Controller A (Z)" nor "Controller A (IRZ)" -- only X & Y (and buttons)

Do you have enabled "split axis" (or disabled "combined axis"?) in the windows control panel under "gaming devices"?

---

REHAB IS FOR QUITTERS

Another question - have you applied the official Gp3 1.13 patch?

---

REHAB IS FOR QUITTERS

I have enabled spit axis (working well in Colin).
I have also 1.13 patch, but this patch is in-game (I have localized GP3 version patched already by manufacturer).

If you have ver. 1.13 and click on

Acceleration Device "Controller A "

this window should pop up:

or

If you press the acceleration pedal you should see the Z axis move. Check the box next to it.

Do the same with Brake Device "Controller A " and chose the IRZ axis.

(btw - i just re-installed the game and din't setup my wheel properly so ignore the selected y-axis.)

---

REHAB IS FOR QUITTERS

I have this:




It seems different to you but i have patch 1.13 built-in :/
OK, I will try to apply patch 1.13 from english version. Do you have any other suggestion what i should try?

This is what you have when you are using ver 1.00. Apply the official patch to 1.13 and your problem will be solved.

---

REHAB IS FOR QUITTERS

Vader Wrote:
-------------------------------------------------------
> This is what you have when you are using ver 1.00.
> Apply the official patch to 1.13 and your problem
> will be solved.

I apply 1.13 patch and my game completely crashed :/
But I download no-CD patch and my game started well and I can now setup Z axis
It seems that I have version 1.13 but with no-CD patch from 1.00.

Thanks.

Actually only the decrypted nocd exe 1.13 should work with Gp3 1.13. :s

But if you have split axis now all is well. :D

---

REHAB IS FOR QUITTERS

Now I have 1.13 + 1.13 no-cd, earlier I HAD probably 1.13 + 1.00 no-cd exe.
Sorry for my english

Do zobaczenia!

---

REHAB IS FOR QUITTERS



Edited 1 time(s). Last edit at 11/18/2004 06:57PM by Vader.

Heh OK!