Mirrors visual

Hi guys. I compiled another cars file with cars 2017, but I have the view of all the mirrors in reverse. What can I do to have them properly?
Thank you.
Fabio

in reverse in what way, is left the right etc ? how about a picture !
normally you can change the the mirrors with gp4 builder under edit and invert the x or y co-ordinates but i am unsure what way you need these changes .
regards to all

You are right. I will take a picture. Anyway, I see everything turned upside down in the mirrors. To be clear, cars have wheels at the top.

Open your car_lod in the gp4buider , go to rear_mirror and left mirror objects and invert the x or y co-ordinates as Munnzy said . The problem will be fixed doing this

Ok. Thank you. I try.

Here's what happens:

[imgur.com]

Open your car_lod in the gp4buider , go to rear_mirror and left mirror objects and invert the x or y co-ordinates as Munnzy said . The problem will be fixed doing this


as rracunis said

this will fix the issue
regards

Thank you guys. I guess I should do it for every car_lod. It will be a big job.

mralpha Wrote:
-------------------------------------------------------
> Thank you guys. I guess I should do it for every
> car_lod. It will be a big job.

10 seconds per each car load , 5 minutes you fix all cars from the grid

true you only need to fix the mirrors on lod_0 for each car 1 and car 2
May seem like a big job but when you have done a couple you will be flying.

nice tutorial rracunis way to go. you should do more i cannot paste a picture on hear for the life of me !!
regards to all, keep the GP4 faith

It's done! Thank you so much.

Fabio

I have a different problem with the mirrors: they are reversed, meaning the right mirror is on the left and vice versa. What should I do in gp4builder to fix the problem? Thanks in advance to anyone who wants to give me a hand.

Rename the z_left_cockpit_mirror to z_right_cockpit_mirror and vice versa in gp4builder.

fongu Wrote:
-------------------------------------------------------
> Rename the z_left_cockpit_mirror to z_right_cockpi
> t_mirror and vice versa in gp4builder.


Many thanks, I solved it, even if renaming the mirrors didn't solve the problem. Then I tried the horizontal flip command and everything worked fine. Now the mirrors are in the right place. Thanks again for your interest, people like you who, in addition to sharing spectacular works, are always ready to lend a hand to those who have little knowledge of the subject, make this community truly special.