Install Zaz Tools on Windows 10 GUIDE

you can try this version

[www.mediafire.com]

Thanks Quickslick for sharing this one! Too bad, I'm getting the "blocked because of dangerous content" warning from Mediafire here.

strange, because for me mediafire works. I've uploaded it again on zippyshare for you

[www99.zippyshare.com]

Thanks a lot Quickslick!

Chrome blocked it (even after I turned off Avast and Windows Firewall), but Firefox did let me download that file. Thanks!

As far as I understand this is the original setup file, right?

That's what I have found already, right now I'm looking for the updates that were linked in the OP.

Well, I guess once I've got that ZaZ Tools working everything should be fine

yes that's the original installer of zaz tools, but it's the latest one

these are the updates, but you have to work on the carset manager ini file, because there are the entries from the user who uploaded the files


[www20.zippyshare.com]



Edited 1 time(s). Last edit at 03/18/2017 01:59PM by quickslick.

Can someone reupload the original installer?

I did everything as mentioned but when I load a mod the wads are not updated and only gpxpatch comes up.

Kimi forever!

Anonymous User Wrote:
-------------------------------------------------------
> Install Zaz Tools on Windows 10
>
> Hi everyone!,
> I noticed that there is not a proper Guide to
> install this. So i took the time make one
> especially for new people.
>
> Very important !!!!
> DO NOT INSTALL in Programs Files (x86) or Program
> Files.
>
> - Install Zaz tools from an ORIGINAL INSTALLER
> (link provided at the bottom of the message)
>
> - Restart the PC
>
> - Open the link of the updated Zaz Tools. Now go
> to the installation location of Zaz Tool and
> overwrite every single file
> with all of the files that was provided with the
> link. (link provided at the bottom of the
> message)
>
> With this method the registry of windows is
> properly written to otherwise it will not work as
> intended.
>
> Files of Zaz Tools that we are going to tweak a
> little:
> Csmcore: Put to run as Administrator and
> compability for Windows XP Service Pack 2
> Slimtex: No need to do anything
> Tsm: Put to run as Administraror
> tsmcore: Put to run as Administrator and comp
> ability for Windows XP Service Pack 2
>
> - OPEN CSM and enter FILE menu- Options and click
> "FILE ASSOCIATION". Select everything and press
> OK.
>
> - Now go back the the OPTIONS menu and Select only
> "Auto Restore" and "Wadcache"
>
> This is the method that I used to get it working
> on Windows 10.
>
> The only thing that does not work is when you
> click a .tex file you can no longer view it
> directly.
> Since windows 8 this feature does not work
> anymore.
>
> LINKS
> ORIGINAL INSTALLER
> [www.mediafire.com]
> ZaZ_Gp4_tools.rar
>
> Updated Zaz Tools:Choose any.
> [www.mediafire.com]
> ZaZ_Gp4_tools+actualizacion.rar
> [mega.nz]
> RnHLX4k8g75bd_E5rWQE
>
>
> I hope everyone will like and make use of this
> guide.
>
> Kind regards
> Jorge.
>
> EDIT: Grammar. Formatting. Spelling.

I get up to the step where I open CSM, but instead of seeing the File Menu, nothing happens, it just opens the zaz tools folder again.

When I try to open CSM it was asking for directx8, but that alert is not showing anymore...

Any ideas? Thanks!

masiso Scritto:
-------------------------------------------------------
> Anonymous User Wrote:
> --------------------------------------------------
> -----
> > Install Zaz Tools on Windows 10
> >
> > Hi everyone!,
> > I noticed that there is not a proper Guide to
> > install this. So i took the time make one
> > especially for new people.
> >
> > Very important !!!!
> > DO NOT INSTALL in Programs Files (x86) or
> Program
> > Files.
> >
> > - Install Zaz tools from an ORIGINAL INSTALLER
> > (link provided at the bottom of the message)
> >
> > - Restart the PC
> >
> > - Open the link of the updated Zaz Tools. Now
> go
> > to the installation location of Zaz Tool and
> > overwrite every single file
> > with all of the files that was provided with
> the
> > link. (link provided at the bottom of the
> > message)
> >
> > With this method the registry of windows is
> > properly written to otherwise it will not work
> as
> > intended.
> >
> > Files of Zaz Tools that we are going to tweak a
> > little:
> > Csmcore: Put to run as Administrator and
> > compability for Windows XP Service Pack 2
> > Slimtex: No need to do anything
> > Tsm: Put to run as Administraror
> > tsmcore: Put to run as Administrator and comp
> > ability for Windows XP Service Pack 2
> >
> > - OPEN CSM and enter FILE menu- Options and
> click
> > "FILE ASSOCIATION". Select everything and press
> > OK.
> >
> > - Now go back the the OPTIONS menu and Select
> only
> > "Auto Restore" and "Wadcache"
> >
> > This is the method that I used to get it
> working
> > on Windows 10.
> >
> > The only thing that does not work is when you
> > click a .tex file you can no longer view it
> > directly.
> > Since windows 8 this feature does not work
> > anymore.
> >
> > LINKS
> > ORIGINAL INSTALLER
> >
> [www.mediafire.com]
>
> > ZaZ_Gp4_tools.rar
> >
> > Updated Zaz Tools:Choose any.
> >
> [www.mediafire.com]
>
> > ZaZ_Gp4_tools+actualizacion.rar
> >
> [mega.nz]
>
> > RnHLX4k8g75bd_E5rWQE
> >
> >
> > I hope everyone will like and make use of this
> > guide.
> >
> > Kind regards
> > Jorge.
> >
> > EDIT: Grammar. Formatting. Spelling.
>
> I get up to the step where I open CSM, but instead
> of seeing the File Menu, nothing happens, it just
> opens the zaz tools folder again.
>
> When I try to open CSM it was asking for directx8,
> but that alert is not showing anymore...
>
> Any ideas? Thanks!


Try to use this version of Zaz Tools: [www.w.gp4central.com]

If you do not resolve, look on google about DirectPlay or DirectDraw.

directX8 in windows 10 (overwriting the currently installed version which is 12)? if you do this can happen two things .. the operating system crash (blue screen of death) or the system nor boot.

----signature--------------------------------------------------------

RELEASE => Physics (under FIA Technical Regulations)
MagicDatas? Setups? Pit Stop Strategies? Track Specific Performances? Up2Date GP?
Power Torque Curve? Where's this stuff? All download is available at ..

MSchumi24 Wrote:
-------------------------------------------------------
> masiso Scritto:
> --------------------------------------------------
> -----
> > Anonymous User Wrote:
> >
> --------------------------------------------------
>
> > -----
> > > Install Zaz Tools on Windows 10
> > >
> > > Hi everyone!,
> > > I noticed that there is not a proper Guide to
> > > install this. So i took the time make one
> > > especially for new people.
> > >
> > > Very important !!!!
> > > DO NOT INSTALL in Programs Files (x86) or
> > Program
> > > Files.
> > >
> > > - Install Zaz tools from an ORIGINAL
> INSTALLER
> > > (link provided at the bottom of the message)
> > >
> > > - Restart the PC
> > >
> > > - Open the link of the updated Zaz Tools. Now
> > go
> > > to the installation location of Zaz Tool and
> > > overwrite every single file
> > > with all of the files that was provided with
> > the
> > > link. (link provided at the bottom of the
> > > message)
> > >
> > > With this method the registry of windows is
> > > properly written to otherwise it will not
> work
> > as
> > > intended.
> > >
> > > Files of Zaz Tools that we are going to tweak
> a
> > > little:
> > > Csmcore: Put to run as Administrator and
> > > compability for Windows XP Service Pack 2
> > > Slimtex: No need to do anything
> > > Tsm: Put to run as Administraror
> > > tsmcore: Put to run as Administrator and comp
> > > ability for Windows XP Service Pack 2
> > >
> > > - OPEN CSM and enter FILE menu- Options and
> > click
> > > "FILE ASSOCIATION". Select everything and
> press
> > > OK.
> > >
> > > - Now go back the the OPTIONS menu and Select
> > only
> > > "Auto Restore" and "Wadcache"
> > >
> > > This is the method that I used to get it
> > working
> > > on Windows 10.
> > >
> > > The only thing that does not work is when you
> > > click a .tex file you can no longer view it
> > > directly.
> > > Since windows 8 this feature does not work
> > > anymore.
> > >
> > > LINKS
> > > ORIGINAL INSTALLER
> > >
> >
> [www.mediafire.com]
>
> >
> > > ZaZ_Gp4_tools.rar
> > >
> > > Updated Zaz Tools:Choose any.
> > >
> >
> [www.mediafire.com]
>
> >
> > > ZaZ_Gp4_tools+actualizacion.rar
> > >
> >
> [mega.nz]
>
> >
> > > RnHLX4k8g75bd_E5rWQE
> > >
> > >
> > > I hope everyone will like and make use of
> this
> > > guide.
> > >
> > > Kind regards
> > > Jorge.
> > >
> > > EDIT: Grammar. Formatting. Spelling.
> >
> > I get up to the step where I open CSM, but
> instead
> > of seeing the File Menu, nothing happens, it
> just
> > opens the zaz tools folder again.
> >
> > When I try to open CSM it was asking for
> directx8,
> > but that alert is not showing anymore...
> >
> > Any ideas? Thanks!
>
>
> Try to use this version of Zaz Tools:
> [www.w.gp4central.com]
> Tools%20v1.26.zip
>
> If you do not resolve, look on google about
> DirectPlay or DirectDraw.


I've installed zaz tool v1.26 and I have DirectPlay activated but the problem still persists

phantaman Wrote:
-------------------------------------------------------
> directX8 in windows 10 (overwriting the currently
> installed version which is 12)? if you do this can
> happen two things .. the operating system crash
> (blue screen of death) or the system nor boot.
>


So what are you suggesting I should do?

use the search tool .. you will be able to find various tips on this complex subject. including some of mine and from other users. one of them and do not install gp4 & tools in the suggested folders..

----signature--------------------------------------------------------

RELEASE => Physics (under FIA Technical Regulations)
MagicDatas? Setups? Pit Stop Strategies? Track Specific Performances? Up2Date GP?
Power Torque Curve? Where's this stuff? All download is available at ..

Ok, I've almost got this figured out. I've managed to install Zaz tools and open CSM menu. but when I click on 'load and restore mods', 'the mods configurables', 'gpxpatch's settings mode', 'launch TSM' and 'Extra Stuff' nothing happens.
Any clues?!

UPDATE: All fixed!



Edited 1 time(s). Last edit at 07/13/2019 04:43PM by masiso.

Mine works perfectly now on Windows 10 by just using the original Installer (gp4central) and the applying the settings as described in the first post (compatibility mod, run as administartor).

Hey man, when I open CSM the file button doesn't show up. Instead it takes me to my documents folder. Any ideas?

AdrianSG29: ... when I open CSM the file button doesn't. Instead it takes me to my documents folder. Any ideas?
Check "GP4 path" and "Carset path" in menu File/Options.

---

petrus' gpaedia files

I did everything according to the instructions, only the Easywad works, but the Slimtex does not work. Slimtex opens briefly and then closes again immediately? Anyone have a solution?

Un saluto a tutti!
Spero di aver scritto nella sezione giusta in caso contrario scusatemi.
Da qualche giorno sto cercando di installare Mod anni 90 su Gp4. Sono abbastanza nuovo a queste cose. Ci ho giocato quasi 20 anni fa e ho scoperto solo ora gli strumenti Zaz per caricare Mods.
Qui sorgono i problemi. Ho tentato una installazione dei tools riesco a caricare le mod Csm premo start entro nel gioco ma nulla è cambiato. Sempre season 2001 originale. Sarei molto grato se qualcuno potesse guidarmi passo passo verso la soluzione. Sistema operativo Windows7. Gp4 installato patch 9.6 e Gpx 4.52. Mod 'sognata' 1997.